Brought some ta technix coilovers for some cheap lows for fcs but when fitting them realised the top mounts were buggered, standard top mounts DO NOT fit. my plan was eventually to get some good ones for track use but as the mounts were no good on these one im not going to bother messing about getting top mounts im just going to buy some for track use.
They were pretty rusted up when i got them so i dremmled the rust off to check the condition of the springs and the springs are ok, was just surface rust. i then anti rust primered and just give them a lick of paint and some laquer.
No leaks etc and seem to be in reasonable condition.
As stated, these require top mounts.
£50 collected from ws7 area.
[attachment=15958]
[attachment=15959]
[attachment=15960]
Secondly some front Spax krypton gas dampers, springs and top mounts
dust covers have split (see pics), topmounts are in reasonable condition and are not ceased, seem to move freely. All worked fine when on the car, no leaks. knocks, bangs etc.
Think they are standard ride height springs? see attached pic of them fitted on the car.
£50 collected from ws7 area.
[attachment=15961]
[attachment=15962]
[attachment=15963]
[attachment=15964]
[attachment=15965]
[attachment=15966]
[attachment=15967]
p.s they deffinetly are not leaking even tho it may look like it in one of the pictures, its wd40 as i give them abit of a spruce up.
They were pretty rusted up when i got them so i dremmled the rust off to check the condition of the springs and the springs are ok, was just surface rust. i then anti rust primered and just give them a lick of paint and some laquer.
No leaks etc and seem to be in reasonable condition.
As stated, these require top mounts.
£50 collected from ws7 area.
[attachment=15958]
[attachment=15959]
[attachment=15960]
Secondly some front Spax krypton gas dampers, springs and top mounts
dust covers have split (see pics), topmounts are in reasonable condition and are not ceased, seem to move freely. All worked fine when on the car, no leaks. knocks, bangs etc.
Think they are standard ride height springs? see attached pic of them fitted on the car.
£50 collected from ws7 area.
[attachment=15961]
[attachment=15962]
[attachment=15963]
[attachment=15964]
[attachment=15965]
[attachment=15966]
[attachment=15967]
p.s they deffinetly are not leaking even tho it may look like it in one of the pictures, its wd40 as i give them abit of a spruce up.