27-03-2014, 04:04 PM
It doesn't look like it's that low judging by the clearance between the (unmodified) bump stop and arm.
You're almost certainly hitting it still though - note the clean bit on the end where presumably its been touching the arm whereas the rest of it is caked in mud.
You might be lucky on that OSR bumpstop too, as that bolt head still looks pretty good and should hopefully undo with a decent 6-sided socket on it and a little patience.
You're almost certainly hitting it still though - note the clean bit on the end where presumably its been touching the arm whereas the rest of it is caked in mud.
You might be lucky on that OSR bumpstop too, as that bolt head still looks pretty good and should hopefully undo with a decent 6-sided socket on it and a little patience.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate