28-02-2012, 02:37 PM
They're disposable gears, use once then throw away, make it lighter. You can run the BE box with a conversion plate but it gets pretty spendy as you need hubs, bearings, shafts, mounts, BE4R 'box and a load of other bits and pieces.
Might have a work with the bloke doing the gears for the buggy on a price for a new gearset tbh...
Foxy - watch how much you skim off, it needs to be matched to the engine flow/cam specs (mine had a fair bit of chamber work to help it with high compression) and you'll need to advance the cam timing if you take off as much as I did.
Might have a work with the bloke doing the gears for the buggy on a price for a new gearset tbh...
Foxy - watch how much you skim off, it needs to be matched to the engine flow/cam specs (mine had a fair bit of chamber work to help it with high compression) and you'll need to advance the cam timing if you take off as much as I did.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.