09-03-2014, 01:38 PM
(This post was last modified: 09-03-2014, 03:10 PM by tigerstyle.)
Luckily nice weather today so out again having a look at it.
Have found that both fans are working ok, bridge Pins 3+5 on the Left relay and both fans come on, bridge pins 3+5 on the right relay and just the right fan turns on (as expected)
Getting info from here: http://www.peugeotlogic.com/workshop/wsh...fanop1.htm
Took the rad loom off and the engine bay side connector looks mint, no corrosion there at all, so something is borked somewhere but?
**********************************
Reading here: http://www.frenchcarforum.co.uk/forum/vi...1&start=15
I think I should be getting 12V on pins 1+2 of the left relay at all times, I thought pins 1+2 are the low voltage contacts for the relay? or are they just 12V but low current contacts so still get the thinner wire? I thought they were 5V?
Either way I don't get any voltage there, so think that might be my problem, the thinner contact wires are broken... maybe...
Have found that both fans are working ok, bridge Pins 3+5 on the Left relay and both fans come on, bridge pins 3+5 on the right relay and just the right fan turns on (as expected)
Getting info from here: http://www.peugeotlogic.com/workshop/wsh...fanop1.htm
Took the rad loom off and the engine bay side connector looks mint, no corrosion there at all, so something is borked somewhere but?
**********************************
Reading here: http://www.frenchcarforum.co.uk/forum/vi...1&start=15
I think I should be getting 12V on pins 1+2 of the left relay at all times, I thought pins 1+2 are the low voltage contacts for the relay? or are they just 12V but low current contacts so still get the thinner wire? I thought they were 5V?
Either way I don't get any voltage there, so think that might be my problem, the thinner contact wires are broken... maybe...