07-03-2014, 10:24 PM
It depends how far you want to go but the gearbox is a direct fit and use the same clutch. You will need the gear rod and gear stick and the reverse cable. When fitting you will find that the sump on the gti 6 works as bottom guard bit for the gear box as well so I changed that as well as the oil pump just in case the pick up was different. Then as I had the sump fitted I found that the high pressure power steering pipe bolts to the sump so I changed that and then had to change the power steering pump for 1 that sits at the top so I then change the whole aux set up for a ph1 set up which is the same as a rallye set up if I am correct.
All the bits I did weren't needed but I had all the bits and I wanted to make a decent/tidy job of it
Let me know if your after any more help/advice. I can try and find some pics if your after some
All the bits I did weren't needed but I had all the bits and I wanted to make a decent/tidy job of it
Let me know if your after any more help/advice. I can try and find some pics if your after some