Tempurature clock to non temp clock

[mark_airey]

Swapping the clocks is the easy bit, the plugs are the same & everything, it really is as simple as removing the bottom dash fascia and removing 2 screws

For the temp sensor you can either try swapping the mirror and hope that the wiring is there or splice a new pair of wires into the wiring at the back of the clock and run them to wherever you want the sensor to be (mine is on the back of the front tow eye behind the bumper) and 5 finger discount the sensor from the passenger mirror of any Peugeot/Citroen in the scrappy that has 1, connect it to the end of your pair of wire you have just installed and cable tie it out of the way...........job done