24-02-2014, 10:55 PM
Today I worked a half day at work and it turned out the wing swap actually took some time. This was the drive at 7pm!
![[Image: IMG-20140224-WA0005_zpsqxonkruv.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG-20140224-WA0005_zpsqxonkruv.jpg)
Finally fixed my front bumper where the internal moulding was falling off. Also did some cable tie cross stitching on the crack down the middle.
![[Image: IMG_20140224_191948_zps3rbauztz.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_191948_zps3rbauztz.jpg)
Wing fixed!
![[Image: IMG_20140224_202958_zpsagyrw0yw.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202958_zpsagyrw0yw.jpg)
![[Image: IMG_20140224_202939_zpsrbbcpnoz.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202939_zpsrbbcpnoz.jpg)
I always keep an eye on the gti6 club and found a member only a few miles away from me who had a beam and magnex for sale. I ended up walking away with a cat back magnex for £40! Fairly happy with it. He said it was very noisy and thats why he was selling it. Definitely looks like its noisy as the diameter is a lot bigger than stock! Anyway what I really want is a shiny tail tip!
![[Image: IMG_20140224_202745_zpsbrncifly.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202745_zpsbrncifly.jpg)
![[Image: IMG_20140224_202853_zps867eeghu.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202853_zps867eeghu.jpg)
![[Image: IMG_20140224_202759_zpstp6y8kdr.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202759_zpstp6y8kdr.jpg)
Not sure how this mounts onto the cat but apparently it clamps around the bit of pipe that sticks out past the flange! We shall find out tomorrow!
![[Image: IMG-20140224-WA0005_zpsqxonkruv.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG-20140224-WA0005_zpsqxonkruv.jpg)
Finally fixed my front bumper where the internal moulding was falling off. Also did some cable tie cross stitching on the crack down the middle.
![[Image: IMG_20140224_191948_zps3rbauztz.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_191948_zps3rbauztz.jpg)
Wing fixed!
![[Image: IMG_20140224_202958_zpsagyrw0yw.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202958_zpsagyrw0yw.jpg)
![[Image: IMG_20140224_202939_zpsrbbcpnoz.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202939_zpsrbbcpnoz.jpg)
I always keep an eye on the gti6 club and found a member only a few miles away from me who had a beam and magnex for sale. I ended up walking away with a cat back magnex for £40! Fairly happy with it. He said it was very noisy and thats why he was selling it. Definitely looks like its noisy as the diameter is a lot bigger than stock! Anyway what I really want is a shiny tail tip!
![[Image: IMG_20140224_202745_zpsbrncifly.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202745_zpsbrncifly.jpg)
![[Image: IMG_20140224_202853_zps867eeghu.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202853_zps867eeghu.jpg)
![[Image: IMG_20140224_202759_zpstp6y8kdr.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_20140224_202759_zpstp6y8kdr.jpg)
Not sure how this mounts onto the cat but apparently it clamps around the bit of pipe that sticks out past the flange! We shall find out tomorrow!
