21-02-2014, 10:23 PM
between fuel filter and primer?
Pipe will be cracked where it goes onto the fitting right at the engine/housing. no doubt. Vibration cracks them there and the metal pipe that the rubber goes over has a sharp edge.
If not, there's a relief valve on the back of the housing, the seals in them are rubber and they dry out. There's a slight possibility your fuel mix has attacked it as well.
Pipe will be cracked where it goes onto the fitting right at the engine/housing. no doubt. Vibration cracks them there and the metal pipe that the rubber goes over has a sharp edge.
If not, there's a relief valve on the back of the housing, the seals in them are rubber and they dry out. There's a slight possibility your fuel mix has attacked it as well.
A moments silence please, for our brothers in the NAD-zone.