22-01-2014, 07:28 PM
The flap is mounted in a triangular shaped housing with a motor on the end, that part could be changed as a unit.
where your inlet is all the way over at the left hand side of the car. the Non-A/c car has it about 400mm closer to the centre of the car.
Iv seen cars where that flap is jammed shut and the windows alwase steam up, im guessing that the old owner removed it so solve it
where your inlet is all the way over at the left hand side of the car. the Non-A/c car has it about 400mm closer to the centre of the car.
Iv seen cars where that flap is jammed shut and the windows alwase steam up, im guessing that the old owner removed it so solve it