that boost compensator hose looks a little weird too.
that makes some of the pics a bit useless then really.
so IS there a throttle arm spring?
and where does it rest?
and is that how you have the max screw positioned at the moment?
Lets start again:
that waranty seal needs removing asap from the max fuel screw.
you need to wire in the stop solenoid...not sure how you even started it without it wiring in....I would hazard a guess that THIS IS YOUR ISSUE!
unless its different, the throttle arm spring is needed!
The return fuel pipe needs a hose clip as does the boost compensator pipe on the intercooler end of the pipe.
(15-09-2013, 05:28 PM)Tonibruce Wrote: Haha sorry I took these pics half way through putting the throttle arm back on, I was just seeing if it was adjusted properly
that makes some of the pics a bit useless then really.
so IS there a throttle arm spring?
and where does it rest?
and is that how you have the max screw positioned at the moment?
Lets start again:
that waranty seal needs removing asap from the max fuel screw.
you need to wire in the stop solenoid...not sure how you even started it without it wiring in....I would hazard a guess that THIS IS YOUR ISSUE!
unless its different, the throttle arm spring is needed!
The return fuel pipe needs a hose clip as does the boost compensator pipe on the intercooler end of the pipe.
Wishes for more power...