24-08-2013, 10:52 PM
Hi guys thread update Its been a long past couple of days Me, and Dave and a friend have been busy the past couple of days getting my fmic fitted Can't thank the dirty Diesel ginge enough for the big effort he helped me with
Thanks to a forum buy from luke
and also got some lowering springs so she will have some pictures of her lowered probably tommorow once ive done the back end aswell 
So here is a few snaps of whats been cracking
Also a couple of weeks ago purchased some black cyclones as some big ass lorry put me a ditch and this was the end result
![[Image: 999155_10151521891682397_442608766_n.jpg]](https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/q84/s720x720/999155_10151521891682397_442608766_n.jpg)
Black clones
![[Image: 1001947_10151539566632397_1591927870_n.jpg]](https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/q81/s720x720/1001947_10151539566632397_1591927870_n.jpg)
Twin pass cooler
![[Image: 970609_10151497011872397_1639966514_n.jpg]](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/q71/s720x720/970609_10151497011872397_1639966514_n.jpg)
Rough idea of how the piping mostly goes together
![[Image: 935854_10151497011747397_1280672979_n.jpg]](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/q82/s720x720/935854_10151497011747397_1280672979_n.jpg)
If Carlsberg did gaskets they would be the best in the world
it didnt seal at first because i forgot to apply my silcon both sides like a tool and had abit of whistling lol Boost nipple put in place so can take boost readings
![[Image: 555021_10151551392707397_1519266991_n.jpg]](https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/q71/s720x720/555021_10151551392707397_1519266991_n.jpg)
Bottom brackets all made up and all piping in place
![[Image: 1150778_10151551751297397_1274371376_n.jpg]](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/q71/s720x720/1150778_10151551751297397_1274371376_n.jpg)
Finished article I think a good 8-10hr job hardest part was getting the stock turbo pipes off they where a right biatch but cans of monster of chips helped us push forward
![[Image: 546897_10151553426367397_67913681_n.jpg]](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/q74/s720x720/546897_10151553426367397_67913681_n.jpg)
There is a little more lag but feels more torquey even though im on a standard map until i get my stage 2 maps in the next few days
Boosting 10psi its holding but spikes upto about 12-12.5 tops
Also got some 2.5" steel from my local zorst supplier to have a 2.5" turbo back with a oval exhaust as prefence of choice and replicate it off the system i have at the moment but that is something that is happening in the next few weeks.
Ill keep you posted peeps
Peace Out Karl



So here is a few snaps of whats been cracking
Also a couple of weeks ago purchased some black cyclones as some big ass lorry put me a ditch and this was the end result

![[Image: 999155_10151521891682397_442608766_n.jpg]](https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/q84/s720x720/999155_10151521891682397_442608766_n.jpg)
Black clones

![[Image: 1001947_10151539566632397_1591927870_n.jpg]](https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/q81/s720x720/1001947_10151539566632397_1591927870_n.jpg)
Twin pass cooler
![[Image: 970609_10151497011872397_1639966514_n.jpg]](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/q71/s720x720/970609_10151497011872397_1639966514_n.jpg)
Rough idea of how the piping mostly goes together
![[Image: 935854_10151497011747397_1280672979_n.jpg]](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/q82/s720x720/935854_10151497011747397_1280672979_n.jpg)
If Carlsberg did gaskets they would be the best in the world

![[Image: 555021_10151551392707397_1519266991_n.jpg]](https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/q71/s720x720/555021_10151551392707397_1519266991_n.jpg)
Bottom brackets all made up and all piping in place
![[Image: 1150778_10151551751297397_1274371376_n.jpg]](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/q71/s720x720/1150778_10151551751297397_1274371376_n.jpg)
Finished article I think a good 8-10hr job hardest part was getting the stock turbo pipes off they where a right biatch but cans of monster of chips helped us push forward
![[Image: 546897_10151553426367397_67913681_n.jpg]](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/q74/s720x720/546897_10151553426367397_67913681_n.jpg)
There is a little more lag but feels more torquey even though im on a standard map until i get my stage 2 maps in the next few days

Boosting 10psi its holding but spikes upto about 12-12.5 tops
Also got some 2.5" steel from my local zorst supplier to have a 2.5" turbo back with a oval exhaust as prefence of choice and replicate it off the system i have at the moment but that is something that is happening in the next few weeks.
Ill keep you posted peeps
Peace Out Karl