i Have got this working now 
had to alter the original wiring drawing a little
so this drawing is as it is now
this drawing connections gives you RF central deadlocking and auto door locking while driving.
the auto door locking can be turned off by instructions in the manual as this is a fuction option
i sacked off the LED as it looked shit,
also the alarm function is disabled by not fitting blue wire to the door trigger, this was giving me a head ack as the signal is the wrong way round on the pug so its binned
also i have changed the wiring on the lock/unlock wires at the new box this is because the wires were too short so i just reversed the switch to the longer cables
but remember if you are doing this you need to add the ground link between (black/yellow/yellowblack) or the locking/unlocking wont work
option time
if you want normal locking leave the jumper selection as standrd
if you want dead locking you have to alter the jumper to 3.5second one pulse
other things to remember
peugeot didnt print the cable numbers all along the cable they only printed at the ends,
dont relly on a colour being the same colour at different parts of the loom they change sometimes
your numbers in your car might be different
i still have my IR system fuctioning as normal but i also have an RF system
things left to do
get keys cut
source an immo chip
had to alter the original wiring drawing a little
so this drawing is as it is now
this drawing connections gives you RF central deadlocking and auto door locking while driving.
the auto door locking can be turned off by instructions in the manual as this is a fuction option
i sacked off the LED as it looked shit,
also the alarm function is disabled by not fitting blue wire to the door trigger, this was giving me a head ack as the signal is the wrong way round on the pug so its binned
also i have changed the wiring on the lock/unlock wires at the new box this is because the wires were too short so i just reversed the switch to the longer cables
but remember if you are doing this you need to add the ground link between (black/yellow/yellowblack) or the locking/unlocking wont workoption time
if you want normal locking leave the jumper selection as standrd
if you want dead locking you have to alter the jumper to 3.5second one pulse
other things to remember
peugeot didnt print the cable numbers all along the cable they only printed at the ends,
dont relly on a colour being the same colour at different parts of the loom they change sometimes
your numbers in your car might be different
i still have my IR system fuctioning as normal but i also have an RF system
things left to do
get keys cut
source an immo chip