14-07-2013, 08:12 PM
Changed the inlet manifold on my gti6 yesterday and now it won't start. It fires on first turn of key then just turns over 
All sesnors etc used off old manifold which was working perfect. New gaskets used too. Spark plugs fore against body so shouldn't be sparking issue. Can smell unburnt fuel after being turned over. Injectors have correct resistance too. If I disconnect map sensor it starts and runs like a bag of shit, then just dies, if you reconnect the sensor it won't fire at all. Am I right thinking that the map sesnor being faulty will cause it to not start?
Any help appreciated, need the car asap and supposed to be goo f fcs.
Thanks
All sesnors etc used off old manifold which was working perfect. New gaskets used too. Spark plugs fore against body so shouldn't be sparking issue. Can smell unburnt fuel after being turned over. Injectors have correct resistance too. If I disconnect map sensor it starts and runs like a bag of shit, then just dies, if you reconnect the sensor it won't fire at all. Am I right thinking that the map sesnor being faulty will cause it to not start?Any help appreciated, need the car asap and supposed to be goo f fcs.
Thanks
