krisjones china blue phase2 1.4

[krisjones91]

    thought i would have a go at carbon wrapping my center console. thats what sunday afternoons are for, lol. after giving a good clean    
i turned the console parts over and measured out the carbon sheet, adding about an inch more to wrap the edges. and pressed the parts down on to the sheets     .
using a hairdryer and a very sharp stanley blade, i cut the inner bits out and heated the edges to wrap around the back of the console. ended up with this     and this    
and finally put back on to the car     .
need more sheets now to do the other bits on the dash.