29-06-2013, 09:32 PM
if you feel so inclined....
1. remove door (helper handy at this point as they heavy!)
2. strip back the rubber boot.
3. cut off old repairs and clean wire up
4. solder in new lengths and shrink wrap accordingly
5. reposition rubber boot and wrap with insulation tape
6. refit door
1. remove door (helper handy at this point as they heavy!)
2. strip back the rubber boot.
3. cut off old repairs and clean wire up
4. solder in new lengths and shrink wrap accordingly
5. reposition rubber boot and wrap with insulation tape
6. refit door
Wishes for more power...
