13-06-2013, 05:38 AM
That's more than likely the issue then...that's the one way valve I mentioned in my earlier post. There's a rubber grommet in the servo that it fits into, make sure this is correctly fitted.
I had one of these fail on me a while back, if you do need a new one there readily available from Pug at about £20 each IIRC. There's two different types depending on which make of servo you have fitted.
I had one of these fail on me a while back, if you do need a new one there readily available from Pug at about £20 each IIRC. There's two different types depending on which make of servo you have fitted.