Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
engine/wiring loom help
#6
(10-06-2013, 05:05 PM)Mal Wrote:
(10-06-2013, 12:07 PM)bigcheez2k3 Wrote: Not all of them, only the later ones. Pump in my old car was off a 406.

Yep, conveniently forgot that part.... Blush

Cars made in 96 should be grand. So some very early registered 1997 cars should be safe too

Can you explain more about the ecu controlled pump?
Is it easily identifyable with extra wiring to it etc
Only asking as the replacement engine and pump in my zx is from a '97 306 td, it had an extra blue plug on the pump which is not used with the zx loom.
Car runs great but very occasionally cuts out when on boost at fairly high revs, always restarts without issue but was always curious about the extra wiring to the pump?
Sorry for the thread hijack.
David
Reply
Thanks given by:


Messages In This Thread
engine/wiring loom help - by tysonbully2k12 - 09-06-2013, 09:54 PM
RE: engine/wiring loom help - by Chris_90 - 10-06-2013, 11:09 AM
RE: engine/wiring loom help - by Mal - 10-06-2013, 11:43 AM
RE: engine/wiring loom help - by bigcheez2k3 - 10-06-2013, 12:07 PM
RE: engine/wiring loom help - by Mal - 10-06-2013, 05:05 PM
RE: engine/wiring loom help - by Zippy121 - 11-06-2013, 09:22 AM
RE: engine/wiring loom help - by Mal - 11-06-2013, 02:56 PM
RE: engine/wiring loom help - by bigcheez2k3 - 11-06-2013, 09:52 AM
RE: engine/wiring loom help - by Zippy121 - 11-06-2013, 11:38 AM
RE: engine/wiring loom help - by Zippy121 - 11-06-2013, 05:25 PM
RE: engine/wiring loom help - by Mal - 11-06-2013, 05:46 PM
RE: engine/wiring loom help - by Zippy121 - 12-06-2013, 04:51 AM
RE: engine/wiring loom help - by bigcheez2k3 - 12-06-2013, 02:40 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  xud wiring loom (what fits) jpderv 4 2,299 05-02-2013, 04:00 PM
Last Post: jpderv
  Engine loom cwspellowe 29 6,121 10-05-2012, 10:20 PM
Last Post: darrenjlobb

Forum Jump:


Users browsing this thread: 1 Guest(s)