Pipes For Air Filter/Future FMIC

[cwspellowe]

It's a tight squeeze tbh. I ran 2" along the back of the engine but I was using the Berlingo mani so not sure how much space you'd have with different ones. It was 2" until it got out of the engine area, then a 90 degree up to 2.25" and another 90 degree over the gearbox up to 2.5" iirc pointing it behind the headlight.

You'll have an ABS pump there most likely, so if you can get a 90 degree elbow to go from 2" to 2.5" at the bulkhead. You want the inlet tract as big as you can get it.