you dont need take the bumper off. or the arch linner.
there is a vent in the behinde where you have pictured into the boot. in the vent is a bolt with an oval hole. slacken that off.
go in the boot, where the jack is stored is 4 more bolts slacken the two closest to that side off.
get a couple of jacks and gentely jack the bumper into.possion.
whilst jacks are holding the bumper. tighten all the bolts up and stick a cable tie where the plastic push clip should be let jacks down. all should stay where it needs to be.
dont listen to all the yokles above
there is a vent in the behinde where you have pictured into the boot. in the vent is a bolt with an oval hole. slacken that off.
go in the boot, where the jack is stored is 4 more bolts slacken the two closest to that side off.
get a couple of jacks and gentely jack the bumper into.possion.
whilst jacks are holding the bumper. tighten all the bolts up and stick a cable tie where the plastic push clip should be let jacks down. all should stay where it needs to be.
dont listen to all the yokles above
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://s1038.photobucket.com/user/167gti8/media/DSC_0190-Copy_zpsf093f84d.jpg.html)
Member of 99% warning or your nothing club!