16-03-2013, 04:59 PM
You dont have to drill notch the manifold mate, well you can but the way i did it was put the boot from the turbo into the plate and chop the bolt flush with the plate so its flat for the manifold to bolt on buddy,
I used some industrial sealant ma mate had in the garage but only a slither as the gasket should work well
I used some industrial sealant ma mate had in the garage but only a slither as the gasket should work well
![[Image: J5hxCcC.jpg]](https://i.imgur.com/J5hxCcC.jpg)