14-03-2013, 06:44 PM
I'm a bit stumped with this one. Built up my 10mm, fitted it to the car today, and went to bleed the fuel lines and no fuel was being pumped. Swapped the solenoid for a spare one, no luck. Took the solenoid's insides out, and still no fuel. Took a delivery valve off, nothing, maybe a tiny dribble but I couldn't see anything.
Even without the solenoid in, it doesn't chuck fuel out the top, the only thing that made it pour out fuel was by using the hand primer.. I took the lid off, checked the lever set and made sure that little dowel was slotted into the collar, and all seemed fine.
I can't think of anything else that I could have done wrong, or maybe the head is no good? The donor pump was full of diesel and nice and clean inside.
Even without the solenoid in, it doesn't chuck fuel out the top, the only thing that made it pour out fuel was by using the hand primer.. I took the lid off, checked the lever set and made sure that little dowel was slotted into the collar, and all seemed fine.
I can't think of anything else that I could have done wrong, or maybe the head is no good? The donor pump was full of diesel and nice and clean inside.