Login

**Piggy** · 05-03-2013, 06:03 PM

HELP!!!!

due to the pump seal being gone, leaking a lot suddenly, I decided to try and do it in situ...

So took the end off..

[Image: 20130305_175746_zps6ea832b3.jpg]

[Image: 20130305_175746_zps6ea832b3.jpg]

all ok apart from that there appears to be two ways to fit this part

[Image: 20130305_175740_zps40fd62cf.jpg]

it goes in here...note the two slots

[Image: 20130305_175706_zps28f4a337.jpg]

180degrees each way, so one will be right and the other 180 out

Which way do I fit it?! Huh

I know I could fit it, see if works and if it doesnt, take it all apart again and refit it 180 the other way, but thats a PITA and I dont want to damage the new seal

Obviously the other side has a handy woodruff key so thats fine
[Image: 20130305_175810_zpsfe334fa6.jpg]

[Image: 20130305_175810_zpsfe334fa6.jpg]

[Image: 20130305_175757_zpsccc24d2f.jpg]

FYI: I said petrol was bad to mix with veg...but I was persuaded on here it be fine, run 5% petrol to veg for two weeks...and it ruined that seal!

Login
Username:
Password:	Lost Password?
	Remember me