glovebox removal

[306__xrdt]

I hade also problem with the glovbox, i couldnt find a new one or a used one so i toke off the glovbox (under there are 2 plastic pins) difficult to get off but would work,
next i used a hot flame tourch to make it open on front off the glovbox about 10/15 cm/4 inch inwords and melt it open all the way be carefull not to do it not to close, iff you have make it open there are 2 springs that need to strech out, put it back again and hot the knife to make smooth service as possible, and the glovebox is repaired.
Reason for not closing (spring to soft need to stretch them wide open) good luck

Sorry bad English Norway here.