Chris' China GTi6

[Chris]

Been after a China GTi for quite a while now, and this one came up cheap a few months back with some accident damage. So I had to snap it up. Will be the 10th 306 that I have put on the road for my own use and hopefully the last.

Cost me £400 for a car that was immaculate bar the bumper, cross member rad etc.
Under 100k, Full History, mint interior, properly looked after.

Only pic that there is of it not long after I picked it up and ripped out the gash angel eyes.



Next to set about fixing the bent cross member, I drilled out all the spot welds and removed the bent panels. I removed the same parts from a car that I was breaking at the time then welded it back together.



Somewhere along the way the clones have been sold and lazers put on as temp wheels, the half leathers sold and my blue carpet and full Ph1 leathers fitted along with ph1 gti door cards, ph1 top glove box. Also fitted a set of Black masks too.

Been busy today fitting my Magnex and the front bumper back on with blanks and a splitter.
Which is where the car stands atm.







Plans are;
Weller steels 8.5x15 front and 9x15 rears, 195/45 tyres (winter/daily setup)
Compomotive TS 8x16 and 9x16 with 195/40 Contis (sumer/show set)
Cambered fully rebuilt rear beam, with 23.5mm TB's, 30mm ARB and solid mounts
Rich W Wishbone Bushes
205 GAZ GHA Coilovers with eccentric topmounts
Rose jointed drop links
Different spoiler
Lightened fly, new clutch etc
Lightened aux pully
BMC CDA to replace the K&N thats on there ATM
Metal Monkey Dials
Auto Dim Mirror
Decent Audio setup