22-01-2012, 10:50 AM
Right, the final 2 problems can be sorted easily. Number 2 - Neons I'm geussing you mean LEDs, the ones that are not working will need to be turned 180degrees as they are polarity sensitive (electricity can only flow one way through Diodes). Number 3 - Will be the flywheel sensor around the back on the engine, it's a 10mm nut holing it tight, loosen that and then remove and give it a clean over with a clean cloth and degreaser, you may find theres peices of metal stuck to it because of the magnet inside for refit and push it in fully. Tighten it up and job jobbed. If this doesnt work you could get a new sensor from the scrappies for next to nothing 