21-01-2012, 09:32 AM
So finally got all mounted and built up again on wed. First run didn't exactly go to plan with the o-ring on the high pressure feed busting and loosing the entire contents of my sump over the road! That sorted though and its going again.
Exhaust didn't quite line up so put a flexi in there and de-cat last night and thats it close to sorted.
So few wee issues to sort yet, don't think my wastegate is working right, might be sticking but havn't really played with boost yet, getting about 10psi atm.
The other issue is actually more annoying. When under acceleration there's sort of a raspy noise coming from brake servo area. No thinking its maybe pipes rubbing against the bulkhead, I'm using standard air pipes but they don't quite reach up high enough to bolt on to the intercooler and are just sitting down the back of the engine. I tried to cable tie these tight but it didn't really work and noise is still there! Anyone any suggestions of what this could be, or better still how to stop it!
Exhaust didn't quite line up so put a flexi in there and de-cat last night and thats it close to sorted.
So few wee issues to sort yet, don't think my wastegate is working right, might be sticking but havn't really played with boost yet, getting about 10psi atm.
The other issue is actually more annoying. When under acceleration there's sort of a raspy noise coming from brake servo area. No thinking its maybe pipes rubbing against the bulkhead, I'm using standard air pipes but they don't quite reach up high enough to bolt on to the intercooler and are just sitting down the back of the engine. I tried to cable tie these tight but it didn't really work and noise is still there! Anyone any suggestions of what this could be, or better still how to stop it!
Gov modded 11mm Bosch + Standard turbo = 137.2bhp . . . . TD04 now in...time to get playing!