17-12-2012, 05:23 PM
On the Lucas there's a stop solenoid connected to the immobiliser unit. Took me a while to drill out the security screws to swap it over. You can bypass out with a 12v feed but the best fix is to either change it over if you've changed the pump or there are places to get it recoded if it's lost it's program for some reason.
There are 2 types that I've come across, 1 has a black control box fixed to the rear of the pump, the other has a bigger solenoid, both connect to the same wires.
There are 2 types that I've come across, 1 has a black control box fixed to the rear of the pump, the other has a bigger solenoid, both connect to the same wires.