06-09-2012, 08:40 AM
Also for the lower pipe, use a 90 deg 45 to 51 reducer off the turbo. Then some 2" pipe with a 67 (iirc can check) bend in it to get to the front of the block.
This sits up nice and tight on a 306 but does require the tu mount on the subframe to be bent a tiny bit.
I ordered my pipe form a company on ebay called pipeworx, has a 1m bit of pipe with the bend in the middel and cut it down approperatly. Cost £20 quid plus delivery.
This sits up nice and tight on a 306 but does require the tu mount on the subframe to be bent a tiny bit.
I ordered my pipe form a company on ebay called pipeworx, has a 1m bit of pipe with the bend in the middel and cut it down approperatly. Cost £20 quid plus delivery.
![[Image: sig.jpg]](http://i89.photobucket.com/albums/k220/c_j_m/sig.jpg)