02-09-2012, 06:12 PM
The vinyl is shiny black stuff - an offcut from a vinyl wrapper who is starting up. It's really mailable and easy to apply, hardest part is avoiding air bubbles.
To remove the sticky residue i used a combination of auto glym 'tar and insect remover' and lots of elbow grease. The AG stuff is really good.
As for cutting it to shape I started with a piece which was oversized and folded the edges around like the OEM stuff. I used a sharp blade - it won't go right through your paintwork!
To remove the sticky residue i used a combination of auto glym 'tar and insect remover' and lots of elbow grease. The AG stuff is really good.
As for cutting it to shape I started with a piece which was oversized and folded the edges around like the OEM stuff. I used a sharp blade - it won't go right through your paintwork!
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
![[Image: Sig500x130.png]](http://i430.photobucket.com/albums/qq25/chris_rx71/Sig500x130.png)