28-08-2012, 04:23 AM
Can anyone assist me in telling me where the dash clocks get their earth from?
During my conversion to low boost I seem to have ended up with my clocks stuck at the following position - permanently. They don't spike here when the ignition comes on, they just sit here full stop. They were working fine beforehand (I installed the P3 front end and checked it)
![[Image: IMAG0370.jpg]](http://dl.dropbox.com/u/4147571/rallyeproject/IMAG0370.jpg)
Only thing I can think that i've disturbed is I took a few earths off in the engine bay to clean the area for painting, but I thought I put everything back where I found it.
Strange thing is the car runs fine but none of the gauges read out.
During my conversion to low boost I seem to have ended up with my clocks stuck at the following position - permanently. They don't spike here when the ignition comes on, they just sit here full stop. They were working fine beforehand (I installed the P3 front end and checked it)
![[Image: IMAG0370.jpg]](http://dl.dropbox.com/u/4147571/rallyeproject/IMAG0370.jpg)
Only thing I can think that i've disturbed is I took a few earths off in the engine bay to clean the area for painting, but I thought I put everything back where I found it.

Strange thing is the car runs fine but none of the gauges read out.
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
![[Image: wallye-gtd.JPG?raw=1]](https://www.dropbox.com/s/pcxk1pgpaucznvr/wallye-gtd.JPG?raw=1)
HDi Owner for 200k/9 years
HDi Owner for 200k/9 years