Turbo oil feeds re gauging interest!

[Jenkosowls]

Updated 05/10/12

The MK1 oil feed as il call it is designed to bolt to the original oil line to which all you have to do is bend it out of the way bolt on and forget. Currently only a k14 oil line has been developed with this although iirc the t2 lines are same fitting possibly others if any one can confirm this. i currently have this setup on a T25 with no issues at all and can acces the line through the wheel arch so is handy!

You get
1x High Pressure Braided Oil Line
1x Banjo Union Bolt
2x Copper washer

Pics







Fitting option 1

---

---

Mk2
Mk2 is designed to replace the whole line for new so plug and play straight forward. and will fit all blocks. this line is much easier to route around areas and line up.
fitting (awaiting price)

Prices
Mk1 price is £25.00 plus paypal fee unless by gift posted recorded first class for peace of mind. On made to order basis only with a maximum 2 day turn around usually within the same day except weekends

Mk2
The price will be £36.00 plus paypal fee unless by gift posted 1st class recorded but this does include a surcharge of £5 for the old block union break down of surcharge is £2.50 for the union and £2.50 first class recorded so in reallity the line cost just £31.00 as i pay for the union and you to post! Which is £8 more than the mk1 this is due to the new 8mm pipe being flared and bent and compression fitting and extra length of hose. Although this may well become cheaper as the hose length is over sized at the moment


Any info or interest contact me via pm