Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fitting conrods
#27
Yeah if you can move the piston around on the pin then its held by the small end on the rod, try not to get too much heat into the actual pin as then that will expand as well as the hole and you will get nowhere fast lol
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:


Messages In This Thread
Fitting conrods - by Ricky - 22-07-2012, 09:00 PM
RE: Fitting conrods - by Ricky - 23-07-2012, 06:52 PM
RE: Fitting conrods - by ash23 - 23-07-2012, 07:01 PM
RE: Fitting conrods - by Ricky - 24-07-2012, 06:31 AM
RE: Fitting conrods - by mark_airey - 24-07-2012, 07:12 AM
RE: Fitting conrods - by Ricky - 24-07-2012, 07:55 AM
RE: Fitting conrods - by ginge191 - 24-07-2012, 08:10 AM
RE: Fitting conrods - by mark_airey - 24-07-2012, 08:23 AM
RE: Fitting conrods - by ginge191 - 24-07-2012, 09:10 AM
RE: Fitting conrods - by Dave - 24-07-2012, 11:10 AM
RE: Fitting conrods - by Ruan - 24-07-2012, 12:50 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 12:54 PM
RE: Fitting conrods - by Ruan - 24-07-2012, 01:07 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 01:51 PM
RE: Fitting conrods - by mark_airey - 24-07-2012, 02:01 PM
RE: Fitting conrods - by CJ_Derv - 24-07-2012, 01:46 PM
RE: Fitting conrods - by samass - 24-07-2012, 01:55 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 02:01 PM
RE: Fitting conrods - by Ricky - 24-07-2012, 01:57 PM
RE: Fitting conrods - by Dave - 24-07-2012, 02:00 PM
RE: Fitting conrods - by samass - 24-07-2012, 02:03 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 02:08 PM
RE: Fitting conrods - by samass - 24-07-2012, 02:08 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 02:10 PM
RE: Fitting conrods - by mark_airey - 24-07-2012, 02:21 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 02:23 PM
RE: Fitting conrods - by mark_airey - 24-07-2012, 02:29 PM
RE: Fitting conrods - by Ruan - 24-07-2012, 03:50 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 07:41 PM
RE: Fitting conrods - by 4WayDiablo - 24-07-2012, 08:10 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 08:22 PM
RE: Fitting conrods - by mark_airey - 24-07-2012, 09:01 PM
RE: Fitting conrods - by ginge191 - 24-07-2012, 10:17 PM
RE: Fitting conrods - by InkedMuttley - 28-07-2012, 06:45 AM
RE: Fitting conrods - by mark_airey - 28-07-2012, 09:03 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  XUD7T and XUD9T suitable conrods? Biggen 1 2,043 08-02-2019, 06:38 PM
Last Post: Biggen
  XUD7, XUD9 and upgrade conrods assembled 4 3,485 10-07-2017, 10:20 AM
Last Post: Ruan
  D8A block and hdi conrods Teddy 16 6,355 15-11-2013, 07:53 AM
Last Post: Dave

Forum Jump:


Users browsing this thread: 1 Guest(s)