Okay, managed to get my hands on a fresh d turbo engine loom to replace the chopped and knackered one that was on the car
all wired up, every connector to the connect plug and the earth bolted on the back of the gbox
so far i havent chopped any wires to feed the pump, still not starting. theres a plug also for the pump which is something to do with the immobiliser on the lucas pump (isnt it?
)
see photos
[attachment=1764]
The wires at the front of the photo are for the two solenoids on the bosch pump. I was getting -12v at the pink one, and either 8v or nothing at the black/green (cant remember now)
Also see the two solenoids in the photo (which wire is supposed to go to which?
a photo of the plug feed, yellow - earth - pink
The little fecker thats stopping the fuel through. If i put a live direct from the battery + you hear it click and it starts straight. But try and take a feed from either of the wires that bolt on the solenoids and nothing, wont start
all wired up, every connector to the connect plug and the earth bolted on the back of the gbox
so far i havent chopped any wires to feed the pump, still not starting. theres a plug also for the pump which is something to do with the immobiliser on the lucas pump (isnt it?
)see photos
[attachment=1764]
The wires at the front of the photo are for the two solenoids on the bosch pump. I was getting -12v at the pink one, and either 8v or nothing at the black/green (cant remember now)
Also see the two solenoids in the photo (which wire is supposed to go to which?
a photo of the plug feed, yellow - earth - pink
The little fecker thats stopping the fuel through. If i put a live direct from the battery + you hear it click and it starts straight. But try and take a feed from either of the wires that bolt on the solenoids and nothing, wont start
