Posts: 2
	Threads: 1
	Joined: Jun 2018
	
Reputation: 
0
Location: Crediton
Car Model/Spec: 306 Meridian hdi
Thanks: 0
	Given 0 thank(s) in 0 post(s)
Country: 
	 
 
	
	
		Just failed the MOT due to no brake lights (which were working only 2 days prior!). Changed the brake light unit switch, via the air vent  (thanks guys I would never have thought of going that route but there isn't any other, even if it rips your arm in the process) and checked the fuse - no joy. Reversing light ok. Any other thoughts on what it may be bulbs appear ok
	
	
	
	
		
	
 
 
	
	
	
		
	Posts: 2,636
	Threads: 102
	Joined: Oct 2013
	
Reputation: 
18
Location: Warwickshire
Car Model/Spec: Ph.1 Gti-6 63k
Thanks: 0
	Given 22 thank(s) in 22 post(s)
	 
 
	
		
		
		01-06-2018, 04:23 PM 
(This post was last modified: 01-06-2018, 04:23 PM by RetroPug.)
	
	 
	
		Are you getting a voltage to the contacts of the bulbs when someone presses the pedal? If so, probably the bulbs. I'd check by switching in a spare anyway.
If no voltage there, fuses can be damaged even if not appearing to be broken by eye (as above same for bulbs).
	
	
	
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
 
	
		
	
 
 
	
	
	
		
	Posts: 7,825
	Threads: 465
	Joined: Dec 2011
	
Reputation: 
114
Location: Cullompton Devon
Car Model/Spec: Vauxhall
Thanks: 1
	Given 98 thank(s) in 92 post(s)
	 
 
	
	
		has the switch been pushed in far enough?
has the switch been pushed out the plastic keeper by the pedal my daughters wouldnt stay in the keeper it was so warn