Posts: 296
Threads: 80
Joined: Dec 2013
Reputation:
1
Location: Tarvin, Chester
Car Model/Spec: 1999 306 Meridian 1.9 TD
Thanks: 0
Given 0 thank(s) in 0 post(s)
Just picked my car up from the garage and both front brake hoses are a fail, it says - "Nearside front (fouling wheel) Brake hose has insufficient room to move, resulting in fouling on any part"
I have upgraded the standard dt brakes to gti so does this mean the hoses are to short and i need to get longer (gti) hoses?
Cheers!
No smoke, No poke!
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
mmmm just get some braided ones on there anyway?
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
There's two different length front hoses for 306's depending on caliper type fitted, so could be yours are the shorter type.
From memory, Lucas calipers (including GTi-6) use the longer hose.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 296
Threads: 80
Joined: Dec 2013
Reputation:
1
Location: Tarvin, Chester
Car Model/Spec: 1999 306 Meridian 1.9 TD
Thanks: 0
Given 0 thank(s) in 0 post(s)
Was thinking of upgrading to braided ones, wheres best to get them?
Just checked europarts and the hoses listed for my standard brakes are the same length as the ones listed for the gti
No smoke, No poke!
Posts: 5,203
Threads: 110
Joined: Jan 2012
Reputation:
20
Location: Devon
Car Model/Spec: Estate, DT, GTI6 and 205
Thanks: 1
Given 30 thank(s) in 30 post(s)
I never knew there were 2 different lengths front hoses. Are yours clipped in right?
As for braided lines just have a search on ebay
Posts: 296
Threads: 80
Joined: Dec 2013
Reputation:
1
Location: Tarvin, Chester
Car Model/Spec: 1999 306 Meridian 1.9 TD
Thanks: 0
Given 0 thank(s) in 0 post(s)
Not sure if they are clipped in properly, its rusted to f**k anyway so its being scrapped unfortunately
No smoke, No poke!
Posts: 1,072
Threads: 57
Joined: May 2012
Reputation:
3
Location: Peterborough
Car Model/Spec: 306 s16 406 v6 Saab 93 Ttid
Thanks: 1
Given 3 thank(s) in 3 post(s)
Afaik as I'm aware and all the books I have access to there is only one length line for the front
The rears have a couple of options
This problem normally occurres when the lines have been fitted incorrectly
Posts: 684
Threads: 58
Joined: Dec 2012
Reputation:
3
Location: Fordingbridge
Car Model/Spec: Loads
Thanks: 1
Given 9 thank(s) in 9 post(s)
Lucas 530mm
Bosch 515mm
Need I say more
Overall Road Going Production Class Winner at BARC Gurston Down Speed Hillclimb 2012, 2013 & 2014 With a class record along the way (For a while), Taking 2nd place will be Ian Redding's 306 GTi
2016 Castle Combe GT championship class winner
Posts: 296
Threads: 80
Joined: Dec 2013
Reputation:
1
Location: Tarvin, Chester
Car Model/Spec: 1999 306 Meridian 1.9 TD
Thanks: 0
Given 0 thank(s) in 0 post(s)
Turns out its because the hoses had come out their clips, so out them back in and cable tied the B**ch to it!
No smoke, No poke!
Posts: 296
Threads: 80
Joined: Dec 2013
Reputation:
1
Location: Tarvin, Chester
Car Model/Spec: 1999 306 Meridian 1.9 TD
Thanks: 0
Given 0 thank(s) in 0 post(s)
That's what i thought but that was probably to much work to do without being paid for it, exactly the reason i do work on my car myself....
No smoke, No poke!
