Rear beam Part no's

[nick000]

After 3 weeks on and off, 2 cans of WD40, 1 hot air gun, a lump hammer, 2 screwdrivers, and countless expletives I have managed to strip down a '6 beam.

Would someome be able to help me with finding the following part numbers at all?

1 x TB threaded end cap
2 x Shouldered bolts that sit behind above cap and into the end of TB's
1 x Nylon Torx c/sink bolt
1 x Seal & bearing kit ( are the ebay kits @ £20 per side ok )
1 x TB end plate
2 x Handbrake cables

As you can tell - quite a b*****d to strip but tube and shafts look ok.

Thanks all Nick

[nick000]

After 3 weeks on and off, 2 cans of WD40, 1 hot air gun, a lump hammer, 2 screwdrivers, and countless expletives I have managed to strip down a '6 beam.

Would someome be able to help me with finding the following part numbers at all?

1 x TB threaded end cap
2 x Shouldered bolts that sit behind above cap and into the end of TB's
1 x Nylon Torx c/sink bolt
1 x Seal & bearing kit ( are the ebay kits @ £20 per side ok )
1 x TB end plate
2 x Handbrake cables

As you can tell - quite a b*****d to strip but tube and shafts look ok.

Thanks all Nick

Can anyone help with where I can find part no's for tb end plate, & end caps?

thanks

[welshpug]

servicebox, desler will be cheapest for most of that and ofte the sole source