Breaking: GI: Diablo red track car

[Grant]

Testing the water with this. If there's not enough interest on this, then I will park it up on a trailer and keep it as a money pit track toy




All parts available.


List as below:

Baker BM camber adjustable top mounts Brand new never fitted £175

Baker BM solid rear beam mounts Brand new never fitted £125

Rippthrough lower strut brace £50

Seam welded subframe. Fully welded. Everywhere. £45

Electric PAS conversion. With custom hose to relocate to infront of gearbox. Will fit any standard engine bay. Hose alone was more than what I am selling for. £60

Mocal 13 row oil cooler with braided lines and sandwich plate £45

Spare 13 row cooler £20

Cyclones, some kerbing. Have Toyo Proxy4's on them, with circa 4-5mm tread. £70

Cobra Monaco S black leather bucket seats £100 pair

TRS black 3 point harnesses £50 pair

Harness bar £40

Seats, harnesses and bar for £170 all together

OMP Corscia steering wheel in black £50

Boss £15

Snap off boss £10

All Three £65

'6 brake setup. With discs and pads. Plenty of life left £50

Scorpion backbox £50

Genuine '6 cat. Passed MOT less that 1k miles ago with ease £50

Billet aluminium lower engine mount in driveshaft housing £20

Wink mirror £20

Quickshift with welded on collars so no play at all. Rather long gearstick, but can be cut down no issues £20

TA coilovers (fronts only) done roughly 5k. Show surface oxidation, but are completely sound. £50

20mm hubcentric spacers. Bolt to hub kind. £50 for all 4

Rose jointed drop links. Will require holes in ARB and shocks to be enlarged by 2mm. £30

Heat wrapped exhaust manifold. Never fitted since wrapped £15

Ph3 crystal headlights £25 pair

Mk3 golf arches. Cut to fit 306. £25

Doors £20 each

Wings £15 each

Bumpers £25 each

Bonnet with aero catches £30

Nissens Radiator ('6 type) £30


All prices are collection only, unless you are willing to arrange your own courier.

Thanks for reading

[Piggy]

I would take the 4 spacers buddy

[td_dan]

Droplinks posted if you do break

[Eeyore]

id take the hydraulic clutch, subframe and oil cooler setup if youre willing to help me fit them!

[cully]

dibs scorpion BB and the tyred clones pick up ace on monday

[Grant]

dibs scorpion BB and the tyred clones pick up ace on monday

Eager Beaver! haha, need to see if there is enough interest yet.


Everyone else, thanks for displaying interest

[td_dan]

Go on ill take the wink mirror aswell for the 205 lol

[cully]

wont be up big smoke again for a while
and a courier would make it all to expensive

sits back down and waits for the rest of the valtures

[martyn92]

Ill take the lower brace if we can arrange postage

[Alan_M]

I'll take the GTi6 brakes (calipers and carriers, yes?), the PAS setup depending on where the parts are from (106 electric pump?) and both wings if they're OK underneath those black arches.

What rack have you got on there? If it's a Xsara 2.4 item, I might have that too depending on price.

Edit.....scrub the wings. Noticed it's a Ph2 and my HDi is a 3. There is a slight difference between them I understand.

[Grant]

I'll take the GTi6 brakes (calipers and carriers, yes?), the PAS setup depending on where the parts are from (106 electric pump?) and both wings if they're OK underneath those black arches.

What rack have you got on there? If it's a Xsara 2.4 item, I might have that too depending on price.

PAS is from a 106 yes. Wings are fine. No Xsara rack though sorry.

[Eeyore]

May have a drivers side wing for the estate if alan doesnt have it.

[Grant]

Probably worth a mention: £900 takes this whole. Taxed it just the other day. Mot till January '15

[zx_volcane]

oil cooler thermostatic? if so please register my keen interest

[Grant]

Oil cooler is not thermostatic no. Rowell has first dibs

Cheers

[Lolben91]

Id like to call dibs on the camber tops, rear beam mounts and coils

[Grant]

Noted mate, thanks

---

OMP Steering wheel added

[bigcheez2k3]

Beam?

[Grant]

Would rather keep it a rolling shell so its easier to get rid of. However if you want it and it gets to the point it cannot roll: £50 no camber or play

[puglove]

Hmmm i think i want those seats........... you think you could wrap them for postage?

[Ben Jay]

Has any one dibs the coilovers?

[Mike]

If you break... Id take the steering wheel, boss an snap off part.. would have to be posted though (:

[ginge191]

I'll take the exhaust... Would need it holding onto til id pop up to do the Cambelt

[Grant]

Id like to call dibs on the camber tops, rear beam mounts and coils

Sure thing mate

Hmmm i think i want those seats........... you think you could wrap them for postage?

If you can arrange a courier to collect them and take the harness bar with them

Has any one dibs the coilovers?

Yes mate, as above. You have seconds though

If you break... Id take the steering wheel, boss an snap off part.. would have to be posted though (:

Ok mate. If you arrange a courier, i will wrap them.

I'll take the exhaust... Would need it holding onto til id pop up to do the Cambelt

Sure thing mate

[WiNgNuTz]

You get my PM?

[Milano_92]

I'd take the lights and cyclones if cully doesn't av em and maybe the bonnet. Lights deffo though

[Matt]

Damn I'd have the bonnet, bumpers, archs and grill off you today if I had the cash!

Front bumper and grill price?

[Dum-Dum]

Aww mate the 6 cat please with lambda and the nissens rad depending on condition.

Also did you have group n engine mounts? Possibly linkages and some other bits for my rallye

[Grant]

Somebody has purchased the car whole. Sorry guys, and thanks to those who displayed interest

[Lwilliams]

Well done mate
Nice not to see it broken