07-06-2014, 05:11 PM 
(This post was last modified: 07-06-2014, 05:11 PM by thebluepearl.)
	
	
	
		Hi, any of you out there using any of these on their car?
Sound deadening and exhaust
	
	
	
Sound deadening and exhaust
| 
				
				 
					Anyone using these?
				 
			 | 
		
| 
	 
		
		
		07-06-2014, 05:11 PM 
(This post was last modified: 07-06-2014, 05:11 PM by thebluepearl.)
	
	 
	
		Hi, any of you out there using any of these on their car? 
	
	
	
Sound deadening and exhaust 
		
		
		07-06-2014, 05:23 PM 
	
	 
	
		I've used silent coat in my last 3 cars, it's good stuff. I believe there's a few running the Hoffman exhausts, C.A.R for one IIRC.
	 
	
	
	
		
		
		07-06-2014, 05:27 PM 
	
	 
	
		not a hoffman but i've got a sportex centre section which is pretty much identical, with a standard backbox it made it sound deeper and gave a rasp to it, was gonna get some dynamat to line the car with to replace the rubbish carpet underlay stuff in the boot, (the stuff above looks like a cheaper kind of similar product)
	 
	
	
Project: Formula Peugeot
 
	
		
		
		07-06-2014, 08:52 PM 
	
	 
	
		Hoffmann tube is alright, have one on my DT. Only issue i have is that my clamps might be a bit too small as the curved part of the pipe would drop down a bit after a short while and scrape more than it should. Other than that is knocks a few RPMs of lag off the turbo spool
	 
	
	
	
		
		
		08-06-2014, 01:10 AM 
	
	 
	
		I have Hoffman mid pipe. All is good but as said above me, hangs a bit low because the hanger attacher isn't where you'd expect no problems I've ever had except a harsh terrain drive I go up it scrape on but for normal use no problem.
	 
	
	
'01 Astor Grey HDi DTurbo 3 Door - Current/Daily/Does Everything I ask of it 
	
Team disASTOR? ![]() 
		
		
		08-06-2014, 06:45 AM 
	
	 
	
		The hoffman exhausts are pretty poorly made from what i've seen and heard, but then again at £45 for a straight through mid-section...
	 
	
	
	
		
		
		08-06-2014, 06:51 AM 
	
	 
	
		If that's genuine silent coat it works well if you use it as intended (as deadening/weighting panels).
	 
	
	
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact. 
	
62k Diablo Phase 1 Gti-6: Project Thread 
		
		
		08-06-2014, 08:19 AM 
	
	 
	(08-06-2014, 06:45 AM)Poodle Wrote: The hoffman exhausts are pretty poorly made from what i've seen and heard, but then again at £45 for a straight through mid-section... This... Not the best quality and certainly not made to spec with hangers etc. But for the price they're alright. Had a decat from them for both a HDi and PD engine. Not actually had the de-mid pipe but Id imagine it'll be the same lol.  | 
| 
				
	 
					« Next Oldest | Next Newest »
				 
			 |