| 
		
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		22-09-2013, 02:11 PM 
(This post was last modified: 29-09-2013, 03:36 PM by Face..)
	
	 
		Where to Start. 
She's a phase 2 DT in white. 
I bought this off a friend of a friend.the car has seen many owners most have treated this car like a cheap one night stand lol.
 
the car needs a lot work which I'll slowly try and do as money is tight and my lack of knowledge.
 
So far I got it running. 
There was a massive air leak stopping the car from running. 
New leak off bung/cap sorted this. 
It's had a new fuel filter from me old one was clogged.
 
Sorted an oil leak,Rocker cover gasket fixed this.
 
New D seal old one was fooked:http://www.ebay.co.uk/itm/Citroen-Peugeot-D-Turbo-306-Intercooler-Seal-D-ZX-Xsara-036522-/251329104832?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a8461cbc0
 
The oil is like tar even when warm! 
Bad points: 
Needs new Injector seals, drop links, offside door loom, rear bumper and wings as there denty, alloys refurbished ,headlight loom repaired, new headlights, new glow plugs as these are crap they cost 12 for 4 posted, new door handle, aerial, pump needs adjusting as she's running lean, and a full service including cam-belt and water pump.Probably more as I've most likely forgot something.
 
Car needs the body work sorting but I did wash and wax this before my mate sold it to his friend in Hereford(who I bought it off.)So this has helped.
 
Good: 
It was cheap. 
2 x basically new tires. 
Full S/S exhaust system. 
Cyclones. 
lowered. 
New Front discs and pads fitted when it was my mates, by us. 
Drives and stops
 
Have oil + filter, Bosch Duraterms, New battery terminals (as I hate the twist fitting.) 
here/ on order.
 
I will need help with one!
 
 ![[Image: th_SAM_0133_zpsc48e759b.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/th_SAM_0133_zpsc48e759b.jpg)  
 ![[Image: SAM_0146_zps0428629a.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0146_zps0428629a.jpg)  
 ![[Image: SAM_0145_zps644102c0.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0145_zps644102c0.jpg)  
 
 
 ![[Image: SAM_0143_zpsb2d62343.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0143_zpsb2d62343.jpg)  http://s290.photobucket.com/user/pumasna...sort=3&o=5
 
 ![[Image: SAM_0141_zpsf7687799.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0141_zpsf7687799.jpg)  
 ![[Image: SAM_0140_zps50b9f20b.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0140_zps50b9f20b.jpg)  
 ![[Image: SAM_0138_zps143b4893.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0138_zps143b4893.jpg)  
 ![[Image: SAM_0136_zps8e58218c.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0136_zps8e58218c.jpg)  
 ![[Image: SAM_0132_zps9b8be300.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0132_zps9b8be300.jpg)  
 ![[Image: SAM_0130_zpscb2cf6e6.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0130_zpscb2cf6e6.jpg)  
 ![[Image: SAM_0128_zps6f48d7d5.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0128_zps6f48d7d5.jpg)  
 ![[Image: SAM_0127_zps726cd779.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0127_zps726cd779.jpg)  
 ![[Image: SAM_0126_zps96439796.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0126_zps96439796.jpg)  
 ![[Image: SAM_0125_zps192c9b84.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0125_zps192c9b84.jpg)  
 ![[Image: SAM_0124_zpse231468a.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0124_zpse231468a.jpg)  
 ![[Image: SAM_0123_zpsd676c38a.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0123_zpsd676c38a.jpg)  
 ![[Image: SAM_0122_zps87fe6618.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0122_zps87fe6618.jpg)  
 ![[Image: SAM_0121_zpse37a9438.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0121_zpse37a9438.jpg)  
 ![[Image: SAM_0120_zps254d9824.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0120_zps254d9824.jpg) 
		
	 
	
	
	
		
	Posts: 7,152 
	Threads: 130 
	Joined: Jan 2012
	
 Reputation: 
82 Location: Kingston
 Car Model/Spec: 106 GO-NAD
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		wow, um, it's got a nice engine?    
sorry, but apt project title, good luck with it!!
	
Member of the 99% warning or you're nothing club
 
		
	 
	
	
	
		
	Posts: 7,347 
	Threads: 163 
	Joined: Dec 2011
	
 Reputation: 
53 Location: Leeds
 Car Model/Spec: 406 HDI
 Thanks: 0Given 18 thank(s) in 15 post(s)
 
 
	
	
		That needs some pretty heavy work doing, glad to see someone saving a knackered one rather than just scrapping it, D-Turbos are starting to get rarer...
	 
		
	 
	
	
	
		
	Posts: 5,902 
	Threads: 142 
	Joined: Dec 2011
	
 Reputation: 
58 Location: Hastings, East Sussex
 Car Model/Spec: E46 BMW 320d
   Thanks: 17Given 28 thank(s) in 28 post(s)
 
 
	
	
		Certainly got your work cut out there mate! Interesting paint job on the clones, had to look twice to realise what they were!    
Good luck with this, will be interested to see what you do with it.   
		
	 
	
	
	
		
	Posts: 95 
	Threads: 7 
	Joined: Oct 2012
	
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Woah, a 306dtub in a sorrier state then mine! Kudos ! Will be interesting to see where you go with this   
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Gave the car a quick wash, removed most of the red house paint that was covering it.Cleaned all the drain channels and confirmed a source of the leak in the roof. 
the leak is coming from the aerial base. 
So will need a new one.
 
Started removing the injectors to put new seals in.But I've had to order a socket so will have to wait till this and the seals/copper washers come. 
I have ready to be fitted glowies and new leak off pipe, better safe than sorry.
 
for anyone needing a socket for the injectors think this is the one you'll need  RAPER 16216 EXPERT 27MM 1/2" SQUARE DRIVE DIESEL INJECTOR SOCKET
 
Come on pay-day!
	
		
	 
	
	
	
		
	Posts: 310 
	Threads: 19 
	Joined: Jan 2012
	
 Reputation: 
1 Location: Aberdeen
 Car Model/Spec: Xantia HDi shed
 Thanks: 2Given 1 thank(s) in 1 post(s)
 
 
	
	
		Wow, that's scabby.   
		
	 
	
	
	
		
	Posts: 4,566 
	Threads: 102 
	Joined: Dec 2011
	
 Reputation: 
9 Location: Sunderland
 Thanks: 60Given 14 thank(s) in 14 post(s)
 
 
	
	
		a trip down to the local scrappy and your laughing. so half of that list should be thinned right out with in a day.where is the intercooler gone?
 
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		23-09-2013, 04:00 PM 
(This post was last modified: 23-09-2013, 04:05 PM by Face..)
	
	 
		 (23-09-2013, 03:44 PM)procta Wrote:  a trip down to the local scrappy and your laughing. so half of that list should be thinned right out with in a day.where is the intercooler gone?
 
Well with funds I'd be laughing.local scrapyard's can cost an arm and a leg.Slow and Steady wins the race and all that.
 
Inter-cooler is in the garage.
 
also needs more than I listed here, loads more!Mostly just loads of niggles.
	 
		
	 
	
	
	
		
	Posts: 1,070 
	Threads: 115 
	Joined: Oct 2012
	
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Wow, this car is more tatty than mine and that's saying something! It certainly makes a change from people just giving up when the paint starts to hang, makes for a good sleeper! But yeah, I think we should have a competition for most bashed up/patched up cars on here lol!
	 
		
	 
	
	
	
		
	Posts: 4,566 
	Threads: 102 
	Joined: Dec 2011
	
 Reputation: 
9 Location: Sunderland
 Thanks: 60Given 14 thank(s) in 14 post(s)
 
 
	
	
		 (23-09-2013, 04:00 PM)Face. Wrote:   (23-09-2013, 03:44 PM)procta Wrote:  a trip down to the local scrappy and your laughing. so half of that list should be thinned right out with in a day.where is the intercooler gone?
 Well with funds I'd be laughing.local scrapyard's can cost an arm and a leg.Slow and Steady wins the race and all that.
 
 Inter-cooler is in the garage.
 
 also needs more than I listed here, loads more!Mostly just loads of niggles.
 
your telling me about some scrappies wanting the earth!   
like you say a bit at a time, and things will sharp move on quickly!
	 
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		 (23-09-2013, 04:07 PM)306Puggy Wrote:  Wow, this car is more tatty than mine and that's saying something! It certainly makes a change from people just giving up when the paint starts to hang, makes for a good sleeper! But yeah, I think we should have a competition for most bashed up/patched up cars on here lol! 
I'm tempted to rat it, if all else fails!
	 
		
	 
	
	
	
		
	Posts: 5,946 
	Threads: 141 
	Joined: Oct 2012
	
 Reputation: 
35 Location: Herefordshire
 Car Model/Spec: 106 rallye, GTi6, Hdi dturbo 
 Thanks: 3Given 14 thank(s) in 14 post(s)
 
 
	
	
		I recognise it from somewhere.....
	 
Current stable '09 Mercedes E320cdi wagon
 '99 306 gti6
 
		
	 
	
	
	
		
	Posts: 95 
	Threads: 7 
	Joined: Oct 2012
	
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Mines semi ratted, or as someone put it 'brokenracecar' look hehe
	 
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		23-09-2013, 05:53 PM 
(This post was last modified: 23-09-2013, 05:54 PM by Face..)
	
	 
		 (23-09-2013, 05:38 PM)ozonehostile Wrote:  I recognise it from somewhere..... 
You should.    
  (23-09-2013, 05:48 PM)thefastest1 Wrote:  Mines semi ratted, or as someone put it 'brokenracecar' look hehe 
Yours is getting there, looks cool.
	 
		
	 
	
	
	
		
	Posts: 774 
	Threads: 44 
	Joined: Dec 2011
	
 Reputation: 
7 Location: Herefordshire
 Car Model/Spec: Miami 205 TD
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		23-09-2013, 06:21 PM 
(This post was last modified: 23-09-2013, 06:23 PM by Face..)
	
	 
		 (23-09-2013, 06:13 PM)Pugmarshall Wrote:  Brads old car? 
Yep and many others old car.
 
Feel free with ozone to pop over and help. 
If ye need any let me know always up for tinkering.
	 
		
	 
	
	
	
		
	Posts: 5,946 
	Threads: 141 
	Joined: Oct 2012
	
 Reputation: 
35 Location: Herefordshire
 Car Model/Spec: 106 rallye, GTi6, Hdi dturbo 
 Thanks: 3Given 14 thank(s) in 14 post(s)
 
 
	
	
		Have you dared look at the rear seat belt mounting points yet? Judging by the state of the rest of it I'm expecting rust lol
	 
Current stable '09 Mercedes E320cdi wagon
 '99 306 gti6
 
		
	 
	
	
	
		
	Posts: 14,208 
	Threads: 448 
	Joined: Dec 2011
	
 Reputation: 
51 Location: isle of wight
 Car Model/Spec: Pov. Spec White '6
 Thanks: 17Given 18 thank(s) in 18 post(s)
 
 
	
	
		Christ that is a mess. I really hope you pull it off and make this a minter   
![[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]](http://i35.photobucket.com/albums/d196/mattbush/20A1806D-891D-40FB-BD52-AD519177A607-7340-0000058F46391753.jpg) TEAM CONROD SHITTING RALLYE! 
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		24-09-2013, 01:12 PM 
(This post was last modified: 24-09-2013, 01:14 PM by Face..)
	
	 
		 (24-09-2013, 11:28 AM)ozonehostile Wrote:  Have you dared look at the rear seat belt mounting points yet? Judging by the state of the rest of it I'm expecting rust lol 
Had a quick look(always look when buying)one has a liner and the other it had a liner at some point.it's not to bad as far as I can tell. 
will get a new liner and under-seal as much as possible at some point. 
If it needs welding it'll become parts due to the cost.
 
Come to Kington you know you want to lol.
 
  (24-09-2013, 11:38 AM)Matt Wrote:  Christ that is a mess. I really hope you pull it off and make this a minter  
Me to, but don't expect much as I'm a noob.
	 
		
	 
	
	
	
		
	Posts: 5,946 
	Threads: 141 
	Joined: Oct 2012
	
 Reputation: 
35 Location: Herefordshire
 Car Model/Spec: 106 rallye, GTi6, Hdi dturbo 
 Thanks: 3Given 14 thank(s) in 14 post(s)
 
 
	
	
		I've got loads of spare bianca wings if you need them?
	 
Current stable '09 Mercedes E320cdi wagon
 '99 306 gti6
 
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
		
		
		24-09-2013, 04:47 PM 
(This post was last modified: 24-09-2013, 04:58 PM by Face..)
	
	 
		 (24-09-2013, 02:23 PM)ozonehostile Wrote:  I've got loads of spare bianca wings if you need them? Yes please, how much? both of mine are denty    
Pm me.
	 
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Quick update.Injectors cleaned and new seals they were a bast**d to do.
 Copper seals were tightened so much, I found rusted rear hub nuts easier!
 Marked the injector seats a little as I had to hammer the seals out but it's all good.
 getting the injectors to seal was fiddly but patience won in the end.
 
 Also replaced the leak off pipes and bung/cap.
 Once the fuel system was bled and everything sealed she started on the button.
 
 Also quickly degreased/steamed the engine bay a lot better but I'll get it cleaner another day.
 
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Oil vapour hose is cracked so will be getting one from pug come pay day 
Car needed a bit of gas to start so in went the new plugs. 
New Glow-plugs are in and new battery terminals.
 ![[Image: SAM_0151_zps10d2d75f.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0151_zps10d2d75f.jpg)  
Old plugs:
 ![[Image: SAM_0155_zps6d49c339.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/SAM_0155_zps6d49c339.jpg)  
New plugs in and start:
 ![[Image: th_SAM_0149_zps4b454884.jpg]](http://i290.photobucket.com/albums/ll271/pumasnake1/306%20xud%20phase%202/th_SAM_0149_zps4b454884.jpg) 
		
	 
	
	
	
		
	Posts: 95 
	Threads: 7 
	Joined: Oct 2012
	
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Looking good pal.
 You sticking a bosch in there some point?
 
		
	 
	
	
	
		
	Posts: 196 
	Threads: 11 
	Joined: Dec 2012
	
 Reputation: 
0 Location: Eire.
 Car Model/Spec: 306 1.6 Sold!!!!!
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		 (29-09-2013, 04:58 PM)thefastest1 Wrote:  Looking good pal.
 You sticking a bosch in there some point?
 
Funny you should say that, I have been looking but I have not managed to find a Bosch set up.If I do I'll buy one and fit it(try to more like lol) . 
I've only managed to find pumps on there own. at extortionate prices.
	 
		
	 |