G.I low boost rallye breaking

[7057sam]

Hi guys im sadly beaking the rallye my loss is your gain.i will be starting to break next friday all being well.

I have

Raceland coilovers included new top mounts -£70
Brembo calipers with braided lines nearly new 288mm disk and brand new genuine peugeot pads-£220
Omp 300 mm wheel-50
Boss-25
Wheel boss extension with adjustable settings-30
Magnum fibreglass bucket seats, light as f*ck, the pair -180
Side mounts and direct fit subframe-100
Sd rollcage in black as the x welded in comes with mounting plates and bolts 500
Rebuilt beam and 6month old mounts -200
Black masks abit cloudy-45
Viper induction filter-40
Rich w pulley-50
Low boost supercharger kit
Including c30 94 charger, rich w manifold, new gti aux, new charger belt, kn filter, cut down engine mount, 13 row mocal charger cooler, chargee fuiled resoir, forge intercooler and pipes with silcone joints(intercooler requires welding on to boost pipes) charger bracket, 2 x slimline 10 fans literally everything you need bar a mani gasket which are about £6 or can re use your own. £2500 ono

High boost intercooler and pipe work -150
Mocal 16 row cooler and lines and fitting kit-100
Battery relocation kit and battery if u pick it up include all leads n earth and fibreglass box-50
Rallye bonnet with lockable aeros-100
Swampy rear braided lines-20
15 td 1.2 all good legal toyo t1r in black ford fitment-240
15 td 1.2 in ford graphite grey not the best but fine as track wheels also ford fitment with slightly less thread but still enough to get you home from track if you super lazy like me lol.also t1r s-200

Spacers and longer bolts and locker-40 or 30 with either set of wheels

Set on hancok ventus v12 tryes 195 50 15 good wet track tryes never used but professional scrubbed down to abit 2-3mm -40

I also have a gearbox with rich w flywheel and 5 thousands mile clutch in.but that may stay with the car as looking to sell shell with little to no rust fully rebuilt front suspension included gearbox, miles linkage, racing group engine mounts, p bushes, wishbones cv gaiters ect have receipt of it all.but may have some interest in that but allways open to offers.love to see it return to its former glory.

All prices don't include postage bur will do it at cost, local pick would be great to.

Like I said hopefully breaking starts as soon as my diesel shit box is ready and I can get the car to carls and do it in a day.will keep you posted thanks again.

[Piggy]

another big shame this week. shocker

[Chris]

Is the mocal 16 row a oil cooler?

[7057sam]

Is the mocal 16 row a oil cooler?

Yes 16 was engine oil cooler, 13 is a charger oil cooler

---

another big shame this week. shocker

I now I should be back in a year or 2 with a fully on track slag just need to get my shit in order if now what I mean.

[Piggy]

fair enough.
its taken me few years to really put a decent full build togetheir. know what you mean

[Just Sean]

Want the roll cage!

What adjustability does the boss have?

[Chris]

Does the oil cooler come with a thermostat controlled sandwich plate?

[Sambarker]

Who rebuilt the back axle? Would it include rear calipers discs/pads and handbrake cables?

[7057sam]

Who rebuilt the back axle? Would it include rear calipers discs/pads and handbrake cables?

Axle was rebuilt by carl chambers adjusted many times can get a picture of receipt if needed

---

Does the oil cooler come with a thermostat controlled sandwich plate?

Yes comes with the plate which goes on sandwich, its not a therostat one tho.

---

Want the roll cage!

What adjustability does the boss have?

45mm-75mm I find the demon tweaks page I got it from.

[LJ_D]

Would the intercooler kit fit hdi?

[7057sam]

The boss extension ad

http://www.demon-tweeks.co.uk/performanc...adjustable

---

Would the intercooler kit fit hdi?

No as its not a twin pass

[puglove]

Is it a Rich W style IC kit?

[7057sam]

Is it a Rich W style IC kit?

I dunno what rich used but completely the same design as his I.e pipes come from underneath.

[Pompey306mark]

Pics of the seats???

[7057sam]

few pictures I have currently not with the car atm.

wheels and brakes



omp wheel prov sold but just incase it falls through



boss extenision





seats






manifold-25
fuel rail-10
polish cam cover very good seals-45
strut brace-45

---

[puglove]

Ahh gutted

[ozonehostile]

awww noo, how come your breaking it mate? was coming together nicely :/

[Chris]

After a oil cooler with a thermostat tbh.
Selling the cf coil pack cover?

[7057sam]

After a oil cooler with a thermostat tbh.
Selling the cf coil pack cover?

They between 10-20 pound from tweaks I actually brought one and they sent the wrong one

Harris got the fc im afraid.

[Welshy_Pete]

Hello what mm are the spacers and mm longer wheel bolts?

[td_dan]

coilovers posted to birmingham?

[Tallguy_2]

How much for the whole car complete then?

[7057sam]

How much for the whole car complete then?

I was gonna put a out right price but as its iinda broken but can still drive within reason.
As the parts would sell separately for around the 5k mark would be looking at around £4500 ono as anyless its not going to cover the money I need

I think chris (pwelloe) wanted them but will get back to you

Spacer are 20mm to get hub to et18 and haven't a clue the length of bolt but they the proper longer ones them lockers.

Just waiting to here back from mate when I can start pulling it apart either
This on next friday

Sorry for the delay been mad being between forums and ebay

[Eeyore]

talk to me on fb!

[hovis16]

Did you have a scorpion sam?

[7057sam]

Did you have a scorpion sam?

Yeah I haven't had a proper look at it yet it may need a slight weld

Would you want it posted got a decat aswell