Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bolt on TDO4 with custom downpipe.
#1
Ready to bolt on, has a custom made stainless down pipe, flexi high pressure oil line, actuator on and working, i brought it off ash23 when he broke his car, intending to put it on mine, i never have and most likely never will so someone may as well put it to good use, only thing missing is the low pressure/return rubber pipe, mine split on my t2 so i used the one off here, no biggy really, open to offers, could bring to fcs or pugfest!

   

   

   
Blaze '6 and Blaze D-turbo!
#2
Price?
#3
(29-06-2013, 05:35 PM)Jimbo Wrote: Price?

PM'd
Blaze '6 and Blaze D-turbo!
#4
price aswell if not sold mate
Vehicle repair and servicing in the midlands pm for detailsĀ 

Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
#5
You are supposed to state a price.
Certainly interested
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#6
PM'd both the above, 130 takes its
Blaze '6 and Blaze D-turbo!
#7
Good price that. Glws
#8
Is that price posted?
#9
Still for sale, price is for collected from either Shrewsbury, fcs or pugfest
Blaze '6 and Blaze D-turbo!
#10
looks impressive setup could even make down pipe bigger whoever buys but impressed with that setup and how youve made the actuator fit Smile
[Image: J5hxCcC.jpg]
#11
PMed . . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#12
(03-07-2013, 11:25 AM)Mattcheese31 Wrote: PMed . . .Smile

Do it do it do it!!!
[Image: J5hxCcC.jpg]
#13
(03-07-2013, 02:42 PM)CJ_Derv Wrote:
(03-07-2013, 11:25 AM)Mattcheese31 Wrote: PMed . . .Smile

Do it do it do it!!!

i have, he hasn't been online since though . . . . still got the other bits for Td04 but i like how the actuator is still on this . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#14
So much want but must resist!
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
#15
(03-07-2013, 03:15 PM)Matt Wrote: So much want but must resist!

well i'll have a turbo, adapter plates and oil line for sale when i buy this if he hasn't sold it already . .lol
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#16
I'm seeing him tonight will tell him to get online!
#17
(03-07-2013, 04:24 PM)Stephen Wrote: I'm seeing him tonight will tell him to get online!

cheers dog . . . . . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#18
Sold to mattcheese Smile cheers for the comments, although it was ash23 that made the setup, also my fmic kit is up for sale too if any ones interested, 80 pound, can also bring to fcs or pug fest Smile
Blaze '6 and Blaze D-turbo!
#19
PM'd about FMIC.
#20
(03-07-2013, 06:16 PM)Mitch Wrote: Sold to mattcheese Smile cheers for the comments, although it was ash23 that made the setup, also my fmic kit is up for sale too if any ones interested, 80 pound, can also bring to fcs or pug fest Smile

If this is ash's old kit, I can vouch for this being an absolute heroric blower for responce, it was straight back there as soon as I touched throttle in his motor, most responsive td04'd xud ive been in
[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
#21
damn i wanna see fmic setup now lol . . . . i'm in the process of putting one of those together too, i'm just a lazy arse and have fcuk all time . .Big Grin
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#22
meh, tmic ftw Wink
[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
#23
(03-07-2013, 07:37 PM)Dave Wrote:
(03-07-2013, 06:16 PM)Mitch Wrote: Sold to mattcheese Smile cheers for the comments, although it was ash23 that made the setup, also my fmic kit is up for sale too if any ones interested, 80 pound, can also bring to fcs or pug fest Smile

If this is ash's old kit, I can vouch for this being an absolute heroric blower for responce, it was straight back there as soon as I touched throttle in his motor, most responsive td04'd xud ive been in

any idea what kind o psi's he was pushing with it? . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#24
epic matt....133bhp...thing of the past!

you want a 11mm pump now Wink
Wishes for more power...
#25
(03-07-2013, 08:07 PM)Piggy Wrote: epic matt....133bhp...thing of the past!

you want a 11mm pump now Wink

133.7 . . .lol . . . .yeah and rods staying in the block maybe a thing of the past too lol . . .hopefully having driven these engines for the last 3+ years i have a little bit of mechanical sympathy for them, don't wanna say too much though and jinx it, we'll see, i've got a theory that early 405 engines were a better batch than some later 306 lumps, time will tell . .Smile


no i don't want a 11mm pump, i probs won't max this setup out, 160+ is where i'm aiming to keep her running rods intact . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#26
Got no excuse now! Get it fitted
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
#27
(03-07-2013, 08:23 PM)Danny2009 Wrote: Got no excuse now! Get it fitted

gonna get it off Mitch at FCS mate, so few other bits to sort before then . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs


Possibly Related Threads…
Thread Author Replies Views Last Post
  de-cat/downpipe 306pc 0 1,667 26-02-2015, 07:10 PM
Last Post: 306pc
  Breaking: Breaking xud challangers lowered disk axle tdo4 Bosch fmic ect Danny2009 12 6,374 15-08-2014, 07:56 PM
Last Post: Danny2009
  Breaking ph3 xud huge spec stainless exhaust tdo4 Bosch pump fmic ect Danny2009 27 12,549 04-08-2014, 07:58 AM
Last Post: ct-hdi

Forum Jump:


Users browsing this thread: 1 Guest(s)