Decat problems

[Steve922]

Sorry for another thread on this topic but i can not find a answer to my problem. After much debate on doing this, i decided to go ahead so been and a bought a decat pipe and 2 middle sections (one to replace the back box). got under the car and went to remove the 2 10mm bolts from the cat pipe but they dont seem to come off, they just keep turning round , so am i missing something? plz help

[Poodle]

Seen the proper studs replaced with a nut and bolt arrangement before, could be you need a spanner/socket on the other end.

[Steve922]

ive tried this but a spanner does not fit the other end of the stud, the stud does not turn but the nut just turns without coming off if that makes sense

[Poodle]

Cut it off then, new fitting kit is only £8 from your local motor factors.

[Steve922]

Nice one think ill get down there later after work

[Frosty]

You might need a crank spanner to get on the bolt properly

[Steve922]

Managed to get some new bolt cost a fiver in total lol so gonna cut the old ones off. Thanks for the info guys ill let you know how I get on