Posts: 1,766
	Threads: 252
	Joined: Dec 2011
	
Reputation: 
7
Location: Sheffield/Leeds
Car Model/Spec: Xud sedan/Xud estate
Thanks: 2
	Given 2 thank(s) in 2 post(s)
	 
	
	
		Theres a level you have to pull out behind the HU that will release the airbag, then lift it out, theres 2 triangle bolts holding a plate over the plug, Undo and unplug then just fit the top glovebox it just screws in.
Remove bulb and done. Might be worth also turning it off first with the key slot but i never did and i drove around for months without one
	
	
	
TD04 11mm Sedan, now 2.1 vnt
Sedan Project 
http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
		
	
 
 
	
	
	
		
	Posts: 92
	Threads: 3
	Joined: Dec 2011
	
Location: Great Wyrley, Nr Cannock, Staffs
Car Model/Spec: 205 1.8 TD Mardi Gras
Thanks: 0
	Given 0 thank(s) in 0 post(s)
	 
	
	
		Cheers mate, a lever you ment? Never seen it and had the head unit out loads of times, not that I don't believe you.... I take it that it's on the left?
Daft question, what does it look like? is it a different colour?
	
	
	
	
		
	
 
 
	
	
	
		
	Posts: 1,766
	Threads: 252
	Joined: Dec 2011
	
Reputation: 
7
Location: Sheffield/Leeds
Car Model/Spec: Xud sedan/Xud estate
Thanks: 2
	Given 2 thank(s) in 2 post(s)
	 
	
		
		
		17-08-2012, 07:01 AM 
(This post was last modified: 17-08-2012, 07:05 AM by HDIkyle.)
	
	 
	
		Its just a flat bit you might need to turn it to be able to pull it
Ye a lever not a level whoops
Think its just a brass colour
	
	
	
TD04 11mm Sedan, now 2.1 vnt
Sedan Project 
http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead