Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
You need an inlet elbow from a 110 406 hdi. There is a detailed guide thread if you.use the search at the top
Member of 99% warning or your nothing club!
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
The bit on the inlet manifold you need to replace with one that points forward from a DW10 that came with an intercooler, they are about £35 from pug buy most people get them from scarp yards, the common place to fin them is a 406 110 HDi but pretty much every PSA car and van bigger than the 306 had them So you have the 406, 607, 806, 307, Expert, Boxer and all the Citroen equivalents and probably more than that.
The pipe off the turbo to the inlet is 'just' jubilee clipped on but there is a hook that hooks over a pin on the front of the turbo you'll need to pull off.
The pipe off the turbo is best done with a 41mm 90* silicone hose and a 2.2HDi (DW10) under engine pipe as it is a nice smooth bend, fits perfectly between the sump and box and has a nice smooth increase in size to 60mm (IIRC)
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
grab the pipes off a 406 and buy a new intercooler
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Thanks: 13
Given 106 thank(s) in 106 post(s)
No. Have a look in the guide section as already suggested, theres a very detailed guide in there with all the information you need. There are also several threads in the last few pages of this section covering the same, if the guide doesnt give you enough info. Have you tried the search function?
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
If you want to search try Intercooler and HDi in the thread title search or FMIC and hdi in the same.
Have a look in the guides section and thats really well laid out and IIRC theres 2 good FMIC guides.