Posts: 25
Threads: 6
Joined: Dec 2012
Location: N.Ireland
Car Model/Spec: 306 HDI 90BHP
well where do i start lol my axle was previously lowered the mr nick way as im from northern ireland lol. The car the axle is on is an hdi with disk brakes but was just wondering would the drum brake with the abs be compatible as ive been offered one never lowered
Posts: 5,902
Threads: 142
Joined: Dec 2011
Reputation:
58
Location: Hastings, East Sussex
Car Model/Spec: E46 BMW 320d
I know some people rate the drums over the discs, handbrakes better so ive heard, but personally id stick with the disc beam, and just get it raised a bit the proper way, and maybe have the bearings etc looked at at the same time, and any ropey parts replaced/refurbed.
Posts: 777
Threads: 94
Joined: Dec 2011
Reputation:
0
Didnt think you were the type to do handbrake turns tom haha
Posts: 25
Threads: 6
Joined: Dec 2012
Location: N.Ireland
Car Model/Spec: 306 HDI 90BHP
get where you's are coming at lol but havent the money to refurb i and can get the other axle cheap as mine is kaput lol just wondering is it just a plug in and away you go lol
Posts: 701
Threads: 59
Joined: Dec 2011
Reputation:
3
Location: Gillingham Kent
Car Model/Spec: 306 D-turbo
Yes its a straight swap just the handbrake cables are different.
Posts: 25
Threads: 6
Joined: Dec 2012
Location: N.Ireland
Car Model/Spec: 306 HDI 90BHP
(01-01-2013, 09:36 PM)Jtrigga Wrote: Yes its a straight swap just the handbrake cables are different.
thank you very much
Posts: 1,286
Threads: 132
Joined: Oct 2012
Reputation:
4
ive swapped 2 axles from drum to disc an it is so easy 6 bolts an brake lines
Posts: 25
Threads: 6
Joined: Dec 2012
Location: N.Ireland
Car Model/Spec: 306 HDI 90BHP
ano its easy to swap but never done a disk to drum lol but now i know it should work