Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Thanks: 0
Given 1 thank(s) in 1 post(s)
Yep, me again.
As the Corolla gathers dust on a driveshaft issue (yes, seriously), I have this instead.
A 406 1.9TD with electrical issues 
![[Image: 17108271207_8621351661_o.jpg]](https://farm9.staticflickr.com/8781/17108271207_8621351661_o.jpg)
![[Image: 17035771081_71497a8045_h.jpg]](https://farm9.staticflickr.com/8825/17035771081_71497a8045_h.jpg)
Spec:
- T2 wound up
- 10mm pump with usual trickery
- Full straight pipe (a bit shorter now)
So far I put on a set of original deflectors, yellow full beams, new arms, tyres and speakers. Most of which was lying about anyway
Need to sort the electrics out, hope the new alternator cures it. I have a set of plugs, some wheels bought for it, a bigger turbo to fit (welded to the manifold job), a drop to implement and general tidying up.
Should be fun when all that's finished
Posts: 537
Threads: 26
Joined: Mar 2014
Reputation:
2
Location: ireland
Car Model/Spec: 306 xud twin turbo compound
Thanks: 0
Given 2 thank(s) in 2 post(s)
Good work lol is that your yard with all the yokes in it lol are just were u work fare few parts at hand there :-)
Posts: 7,347
Threads: 163
Joined: Dec 2011
Reputation:
53
Location: Leeds
Car Model/Spec: 406 HDI
Thanks: 0
Given 18 thank(s) in 15 post(s)
406 friend
Posts: 746
Threads: 49
Joined: Dec 2013
Reputation:
2
Location: Pie eating land.
Car Model/Spec: 306 HDI Estate + 205 HDI
Thanks: 5
Given 14 thank(s) in 14 post(s)
Did you fit a Bosch VE to your old 406HDI a while back? Nice graffiti in the background LOL
Posts: 4,566
Threads: 102
Joined: Dec 2011
Reputation:
9
Location: Sunderland
Thanks: 60
Given 14 thank(s) in 14 post(s)
good motors those are! my dad had one in that colour too.
Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Thanks: 0
Given 1 thank(s) in 1 post(s)
(29-04-2015, 10:40 PM)pioneer DJ paddy Wrote: Good work lol is that your yard with all the yokes in it lol are just were u work fare few parts at hand there :-)
Ah no the exhaust was falling off so tied it up! Not my yard, but need a forklift in mine 
(30-04-2015, 05:57 AM)THE_Liam Wrote: 406 friend
I'm mad for the auld 406's! I said after the red one I wouldn't again... But here I am :p
(30-04-2015, 01:06 PM)Uberderv Wrote: Did you fit a Bosch VE to your old 406HDI a while back? Nice graffiti in the background LOL
Never had a 406HDi! But I know the car you're on about, it was ran on veg I do end up in some charming places alright!
(01-05-2015, 06:24 PM)procta Wrote: good motors those are! my dad had one in that colour too.
Always wanted one in that colour! Just by pure chance I have this one and if I sort the electrics it's a keeper
I got my recon alternator and a set of 25mm spacers with bolts... Priorities eh
Now to find just one more wheel, that isn't going to break the bank 
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
didnt realise that they ever put the td lump in a 406.
Posts: 6,258
Threads: 371
Joined: Feb 2014
Reputation:
29
Location: suffolk
Car Model/Spec: ford fiesta
Thanks: 4
Given 82 thank(s) in 82 post(s)
My 2.1 come out a 406.
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Posts: 4,566
Threads: 102
Joined: Dec 2011
Reputation:
9
Location: Sunderland
Thanks: 60
Given 14 thank(s) in 14 post(s)
(01-05-2015, 07:42 PM)Eeyore Wrote: didnt realise that they ever put the td lump in a 406.
yeah, not sure if they setup like the Hdi, ( no intercooler) or if they had a front mounted one. They moved ok too, but not as quick off the mark as the 306, but they cruised really well and made great tow cars too.
Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Thanks: 0
Given 1 thank(s) in 1 post(s)
About time I dropped in here again :D
So in June, I had a slight oopsie moment
![[Image: 21003501989_daf0d186fc_k.jpg]](https://farm1.staticflickr.com/733/21003501989_daf0d186fc_k.jpg)
The last time seeing that car
![[Image: 21163149336_7ca825733b_b.jpg]](https://farm6.staticflickr.com/5764/21163149336_7ca825733b_b.jpg)
So, here is its replacement, the following day after that incident
![[Image: 19147304932_43f102084a_k.jpg]](https://farm1.staticflickr.com/479/19147304932_43f102084a_k.jpg)
Completely different car in every way.... He lied through his face :rofl:
First job: Savaras
![[Image: 21163883246_9a0d89b086_k.jpg]](https://farm6.staticflickr.com/5660/21163883246_9a0d89b086_k.jpg)
Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Thanks: 0
Given 1 thank(s) in 1 post(s)
Posts: 3,419
Threads: 120
Joined: Jan 2014
Reputation:
35
Location: Powys / Herefordshire
Car Model/Spec: Rallye/S16 & 175 megane
Thanks: 147
Given 40 thank(s) in 40 post(s)
Loving the determination! keep at it fella
![[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]](http://i143.photobucket.com/albums/r143/matt-taylor/17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg)
Team Cyril
Posts: 1,791
Threads: 19
Joined: Jun 2012
Reputation:
12
Location: Devonshire
Car Model/Spec: Peugeot 309 GRD(T)
Thanks: 4
Given 25 thank(s) in 24 post(s)
All of the keen-ness.
nice one
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
So the 406 1.9 comes with a 10mm pump then does it?
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Thanks: 0
Given 1 thank(s) in 1 post(s)
(14-09-2015, 11:39 AM)Mattcheese31 Wrote: So the 406 1.9 comes with a 10mm pump then does it?
Nah 10mm from a caddy! Had the engine out and decided to swap the heads. Was thinking of putting in an 11mm head but decided against it....
Have a bigger turbo again to fit, a T25 that's like new that I got for free. Have another T2 housing to get reamed out someday but I'm in no rush, the GT20 is lovely for everyday driving.
A terrible vid of what it sounds like outside!
Posts: 3,662
Threads: 127
Joined: Feb 2012
Reputation:
33
Location: London
Car Model/Spec: ZX Volcane TD
Thanks: 6
Given 32 thank(s) in 32 post(s)
20-09-2015, 04:41 PM
(This post was last modified: 20-09-2015, 04:41 PM by zx_volcane.
Edit Reason: spellingz
)
welded wastegate on that gt20?
Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Thanks: 0
Given 1 thank(s) in 1 post(s)
(20-09-2015, 04:41 PM)zx_volcane Wrote: welded wastegate on that gt20?
Yep, it's in a T2 housing though. Have plans for a T25 swap, when I get around to it. Same again, reamed out T2 housing.
Need to sort the front of the car too, bumper got torn off 
Posts: 5,205
Threads: 91
Joined: Dec 2011
Reputation:
83
Location: Oxfordshire/Cornwall
Car Model/Spec: Moonstone DT/Volvo V50
Thanks: 2
Given 41 thank(s) in 41 post(s)
![[Image: 19872483445_9671d979d8_k.jpg]](https://farm1.staticflickr.com/286/19872483445_9671d979d8_k.jpg)
Bet that extension reel makes some interesting noises when the welder strikes!!!! 
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in.  Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Posts: 14,208
Threads: 448
Joined: Dec 2011
Reputation:
51
Location: isle of wight
Car Model/Spec: Pov. Spec White '6
Thanks: 17
Given 18 thank(s) in 18 post(s)
Did I read that you found the replacement engine in a skip? That's amazing!!
![[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]](http://i35.photobucket.com/albums/d196/mattbush/20A1806D-891D-40FB-BD52-AD519177A607-7340-0000058F46391753.jpg)
TEAM CONROD SHITTING RALLYE!
Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Thanks: 0
Given 1 thank(s) in 1 post(s)
Yes, it was an engine that I saw in a skip. No room for it and was going to be dumped... So I closed in on it!
406's don't have 10mm heads, I just had a spare 10mm head lying about
I haven't really done much, the backbox exploded and I replaced it with a pipe. Does the job!
The skip engine has done almost 6k miles so far and is due an oil change during the week, I'll probably get that done at the weekend.
A vid of it in action (it does get a little loud in places, not as loud as in real life though):
The front came back well despite its meeting with the ditch, which ripped the front of the car off... Still needs a lot to sort that but it's cosmetically alright and crucially the legs aren't bent
Cold starting is comedy as the glows have failed
I'll poke my head in here again soon
Posts: 29
Threads: 3
Joined: Nov 2015
Reputation:
0
Location: Essonne-91
Car Model/Spec: 306 estate and 106 swap jp4
Thanks: 2
Given 0 thank(s) in 0 post(s)
Country: 
hello,
what's the name of product, for repair your alloy wheels?
thx
Posts: 1,310
Threads: 47
Joined: Sep 2013
Reputation:
14
Location: Browsing eBay for Turbos.
Car Model/Spec: Ford cougar v6. Mk6 Transit
Thanks: 12
Given 20 thank(s) in 20 post(s)
It's called Elbow Grease. Look for it on Amazon.
![[Image: 2ljm03k.jpg]](http://i57.tinypic.com/2ljm03k.jpg)
I Don't Have A 306.
Posts: 29
Threads: 3
Joined: Nov 2015
Reputation:
0
Location: Essonne-91
Car Model/Spec: 306 estate and 106 swap jp4
Thanks: 2
Given 0 thank(s) in 0 post(s)
Country:
 thx
Posts: 59
Threads: 11
Joined: May 2015
Reputation:
0
Location: Ayrshire
Car Model/Spec: 306 d turbo estate
Thanks: 1
Given 1 thank(s) in 1 post(s)
Country: 
Awesome I might have to hunt for one of theses next
Posts: 4,189
Threads: 61
Joined: May 2012
Reputation:
11
Location: Bury St Edmunds Suffolk
Car Model/Spec: rallye,Astor 6
Thanks: 2
Given 41 thank(s) in 41 post(s)
Great project so far
Damn so want a 406 now.
Astor 6 Fast road/track project
Posts: 7,347
Threads: 163
Joined: Dec 2011
Reputation:
53
Location: Leeds
Car Model/Spec: 406 HDI
Thanks: 0
Given 18 thank(s) in 15 post(s)
(22-11-2015, 11:20 PM)7057sam Wrote: Great project so far
Damn so want a 406 now. Great cars to be honest. Really good for long distances, comfy, tough, cheap, good on fuel, and they handle alright as well for what they are.
Posts: 111
Threads: 6
Joined: May 2014
Reputation:
0
Thanks: 0
Given 0 thank(s) in 0 post(s)
Epic haha, zero f**ks given. Engine from a skip, pipe out the back, love it.
Posts: 199
Threads: 16
Joined: Mar 2013
Reputation:
0
Location: Meath
Car Model/Spec: 406TD/XUD Corolla/lolvan
Thanks: 0
Given 1 thank(s) in 1 post(s)
Feck all done since the last time! Made a horrid crude turbo outlet pipe with a lot of exhaust pipe but far far better than the Xantia part that isn't made any more....
Seeing as I was too lazy to get a pic, heres a vid of it
Changed the glows too. All 4! With a set I had in a head I had lying round here
Bonus vid: rewelded the pipe out back and was looking for leaks
Bonus bonus vid: in a pic above was a vulcan red 406 which I used to own
I'll be back some day
|
![[Image: Image423_zps1ac08bc4-1_zps15c76431.jpg]](http://i1225.photobucket.com/albums/ee388/humbrol/Image423_zps1ac08bc4-1_zps15c76431.jpg)
![[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]](http://s768.photobucket.com/user/annegg5511/media/Mobile%20Uploads/tapatalk_1427020983519_zpsnwvozlhb.jpeg.html)
![[Image: 21163240146_d77c2952e9_k.jpg]](https://farm6.staticflickr.com/5713/21163240146_d77c2952e9_k.jpg)
![[Image: 21190360245_049ac0cdbd_k.jpg]](https://farm6.staticflickr.com/5649/21190360245_049ac0cdbd_k.jpg)
![[Image: 20568731543_a2fa868f75_k.jpg]](https://farm1.staticflickr.com/754/20568731543_a2fa868f75_k.jpg)
![[Image: 19375346754_0d16a632f9_k.jpg]](https://farm1.staticflickr.com/336/19375346754_0d16a632f9_k.jpg)
![[Image: 19249876394_705d7481fc_k.jpg]](https://farm1.staticflickr.com/469/19249876394_705d7481fc_k.jpg)
![[Image: 19266602074_4ab2dbd457_k.jpg]](https://farm4.staticflickr.com/3787/19266602074_4ab2dbd457_k.jpg)
![[Image: 19268322943_836c93f6ec_k.jpg]](https://farm1.staticflickr.com/417/19268322943_836c93f6ec_k.jpg)
![[Image: 20566808544_a413ca0810_k.jpg]](https://farm1.staticflickr.com/616/20566808544_a413ca0810_k.jpg)
![[Image: 21164114226_22c25c8ccf_k.jpg]](https://farm1.staticflickr.com/772/21164114226_22c25c8ccf_k.jpg)
![[Image: 20567426854_a661662861_k.jpg]](https://farm1.staticflickr.com/651/20567426854_a661662861_k.jpg)
![[Image: 21179772852_3ce61caf4c_k.jpg]](https://farm6.staticflickr.com/5680/21179772852_3ce61caf4c_k.jpg)
![[Image: 21163826236_7e0184d67d_k.jpg]](https://farm6.staticflickr.com/5655/21163826236_7e0184d67d_k.jpg)
![[Image: 20567442234_58075a181a_k.jpg]](https://farm1.staticflickr.com/621/20567442234_58075a181a_k.jpg)
![[Image: 21164080196_fc24b1a01c_k.jpg]](https://farm1.staticflickr.com/694/21164080196_fc24b1a01c_k.jpg)
![[Image: 21001961360_9dd997e3df_k.jpg]](https://farm6.staticflickr.com/5699/21001961360_9dd997e3df_k.jpg)
![[Image: 21001940100_e39d515e7d_k.jpg]](https://farm6.staticflickr.com/5685/21001940100_e39d515e7d_k.jpg)
![[Image: 19929335595_28fbb986dd_k.jpg]](https://farm1.staticflickr.com/276/19929335595_28fbb986dd_k.jpg)
![[Image: 19990199282_4a88bbae83_k.jpg]](https://farm1.staticflickr.com/436/19990199282_4a88bbae83_k.jpg)
![[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]](http://s143.photobucket.com/user/matt-taylor/media/17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg.html)
![[Image: avatar_zpstlcgvhg8.jpg]](http://img.photobucket.com/albums/v363/toastmonster/avatar_zpstlcgvhg8.jpg){kind=avatar}
![[Image: Cn91r40h.jpg]](http://i.imgur.com/Cn91r40h.jpg)
