New wheels. Another one

[Matt]

Right so specs are 16x7 et 20 or et 25. Et20 will need 3mmish spacers and et 25 will need 10mm. Am I right?

I can either go 15" or 16" but I am undecided. I want them too sit nice and tight to the outer arch, but don't want to have to do any arch work

Am I right about the spacers? If so would the et 25 with 10mm spacers likely scrub? I'm quite low

[Piggy]

Depends on tyre size too don't forget.

Imo, et15 is much better look. Et18 standard sits quite far in...

I'm running et-2 with 15x6 with 195s...lowered 40mm. Slightly rolled arches. So plenty of scope

[Matt]

I'd probably run 195/45 or 195/50, I'm more than likely going to run the et25 with a 10mm spacer

[Piggy]

That sounds fine then tbh

[Matt]

Right so it will be 15x7 et 20 with a 10mm spacer running 195/45 feel these will fit perfect and no need for arch rolling.

Just got to find the £350 now ?

Cheers for the help

[toseland]

if you can squeeze up to '50 profile tyres you can get PS3s for 46 each from black circles

[welshpug]

Depends on the width of the wheel.

ET is only relevant when you know that.

[Piggy]

He has put the width of the wheel!

[Matt]

The choice is et 30 with 15x7
Or et 20 15x8

I got mixed up. Which will fit in the arch better? I'd prefer the run the 8j with 5mm spacers, but I really don't want to have to start arch rolling it all

[Piggy]

15x8 and I would have said you'll need to roll arches