Front bumper

[Mikefish100]

Hi all.

On my hdi, between the front grill and the top of the bumper there is a slight gap.
I was wondering if there's anything that's causing this or is it time for a new bumper?

Cheers.

[Frosty]

Undone the bolts that hold the bumper on and then get someone to hold the bumper up and do the bumper bolts back up

[Mikefish100]

Undone the bolts that hold the bumper on and then get someone to hold the bumper up and do the bumper bolts back up

Cheers frosty! . Didn't realise it would be something that simple.

[powerandtorque]

You might find that it'll be still sag a little in the middle even after you've done that though - seems to be a common-ish thing.

[Mikefish100]

You might find that it'll be still sag a little in the middle even after you've done that though - seems to be a common-ish thing.

Yeah I've seen a couple before with the middle a little saggy. But I'll do what Frosty said and see how it goes

[RetroPug]

There are white adjusters at each end of the bumper that can be turned to allow the bumper to sit further forwards/backwards and upwards/downwards.

[mcvite]

Are the three fixing points underneath the bumper intact? because if they are broken that would cause your front bumper to sag a little.

[silverzx]

Cable ties will help solve this.

[Mikefish100]

Haha liking the cable tie one!

Pretty sure all the fixing points underneath are in tact from what I can remember but will have a look over the weekend.

[Eeyore]

I used 30 cable ties to fix my bumper. The mounts and grille had come away. Yeh its always a bit saggy but forcing it up and doing the bolts up will make a big difference!