Posts: 1,766
	Threads: 252
	Joined: Dec 2011
	
Reputation: 
7
Location: Sheffield/Leeds
Car Model/Spec: Xud sedan/Xud estate
Thanks: 2
	Given 2 thank(s) in 2 post(s)
	 
	
		
		
		16-06-2013, 08:42 AM 
(This post was last modified: 16-06-2013, 10:40 AM by HDIkyle.)
	
	 
	
		This is after a pump change so my guess is I need to adjust the pump on the bracket. Which way do I turn the pump or is it just trial and error?
	
	
	
TD04 11mm Sedan, now 2.1 vnt
Sedan Project 
http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
		
	
 
 
	
	
	
		
	Posts: 2,105
	Threads: 170
	Joined: Dec 2011
	
Reputation: 
5
Location: west yorkshire
Car Model/Spec: xud 1.9 dturbo
Thanks: 2
	Given 0 thank(s) in 0 post(s)
	 
	
	
		You mean advance it?  Move it Towards the block I'm sure
	
	
	
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died 
Moonstone hdi stage 2
	
		
	
 
 
	
	
	
		
	Posts: 1,070
	Threads: 115
	Joined: Oct 2012
	
Thanks: 0
	Given 0 thank(s) in 0 post(s)
	 
	
	
		There are two things to check: Timing and fuel filter. If the timing is correct then I would suggest changing the fuel filter, as a blocked fuel filter will interfere with injection timing. You adjust the pump away from the engine for later injection and towards the engine for earlier injection. About 3/4rds is the correct setting.
	
	
	
	
		
	
 
 
	
	
	
		
	Posts: 6,482
	Threads: 226
	Joined: Dec 2011
	
Reputation: 
24
Location: Cornwall
Car Model/Spec: A3 TDi 
Thanks: 0
	Given 0 thank(s) in 0 post(s)
	 
	
	
		Is it revving up ok? Make sure its time up well, pull brave and tight over the pump pulley hold the tension onto and over the cam pulley then release the tentioner to hold it. Did you move the studs if its a lucas to bosch swap?
	
	
	
Doesnt even own a 306.
	
		
	
 
 
	
	
	
		
	Posts: 1,766
	Threads: 252
	Joined: Dec 2011
	
Reputation: 
7
Location: Sheffield/Leeds
Car Model/Spec: Xud sedan/Xud estate
Thanks: 2
	Given 2 thank(s) in 2 post(s)
	 
	
	
		Never took belt off so it should be timed fine and fuel filters new. does rev fine when driving just start up
	
	
	
TD04 11mm Sedan, now 2.1 vnt
Sedan Project 
http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead