306oc - Peugeot 306 Owners Club & Forum
Gti6 crank sensor - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: Gti6 crank sensor (/showthread.php?tid=9921)



Gti6 crank sensor - 318d4n - 17-01-2013

Does anyone know where the crank sensor is on a 98 gti6? i've tried searching but cant seem to find anything, also does anyone know how hard/easy they are to change & get to?


Gti6 crank sensor - Jonny b - 17-01-2013

It's near the crank bud!

And very easy to change


RE: Gti6 crank sensor - 318d4n - 17-01-2013

This what im looking for? apologies for being a think shit, not had much to do with engines before

http://www.ebay.co.uk/itm/205-1-6-206-1-9-D-306-GTI-6-2-0-CRANKSHAFT-SENSOR-/280550369027?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41521ae703


RE: Gti6 crank sensor - Niall - 17-01-2013

Its a blue plug, front of the engine left hand side just next to the cam cover. Whats the problem bud?


RE: Gti6 crank sensor - 318d4n - 17-01-2013

cheers mate, one im going to look at saturday, said the crank sensors gone, he checked the ohms of the sensor and got no reading, was just wondering how much hassle it would be changing it if i decided to buy it.


RE: Gti6 crank sensor - Niall - 17-01-2013

sorry bud i read cam sensor for some reason.

Crank sensor is on top of gearbox where it meets the block right underneath the thermostat housing. Its bolted into the box with a 10mm bolt and has a 10cm fly lead coming off of it into a brown 3 pin plug.


RE: Gti6 crank sensor - 318d4n - 17-01-2013

no worries mate, that sounds more like what i found on ebay, this what im needing then? http://www.ebay.co.uk/itm/205-1-6-206-1-9-D-306-GTI-6-2-0-CRANKSHAFT-SENSOR-/280550369027?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41521ae703


RE: Gti6 crank sensor - Niall - 17-01-2013

Spot on mate. Its a bit of a PITA to get out. Need a 10mm spanner and small hands unless you want to take the top rad hose and thermostat housing off but obviously it will all need rebleeding then.


RE: Gti6 crank sensor - 318d4n - 17-01-2013

cheers for the help mate, not worried about that will get it out somehow, girlfriend has small hands lol hopefully the whole cars in as good condition as he claims it isSmile


RE: Gti6 crank sensor - miles - 18-01-2013

Sounds a bit iffy to me, DIY and OHM's law is never a good thing and for the sake of £20.00 wouldn't you replace it


RE: Gti6 crank sensor - Niall - 19-01-2013

(18-01-2013, 10:53 PM)miles Wrote: Sounds a bit iffy to me, DIY and OHM's law is never a good thing and for the sake of £20.00 wouldn't you replace it

Sorry what? What's the difference between me doing it and a mechanic doing it? Any decent mechanic will test a sensor before just ripping their customer off and replacing stuff that might not need replacing.


RE: Gti6 crank sensor - cjm_harris - 22-01-2013

Got a pretty much brand new crank sensor here for £10 delivered if you want it?

Smile